涂料厂粉料气力输送技术探讨  

The Investigation on Pneumatic Conveying Technology of Powder Material in Coating Factory

作　　者：贺宏伟 He Hongwei(Guangdong Gem-horse Engineering Co.,Ltd.,Guangzhou 510380,China)

机构地区：[1]广东政和工程有限公司,广东广州510380

出　　处：《广东化工》2021年第9期145-147,共3页Guangdong Chemical Industry

摘　　要：介绍了涂料的组成,比较了常用的粉料输送技术,探讨了采用气力输送技术输送涂料厂的粉料。结果表明:气力输送技术输送大流量粉料具有输送效率高、投资和运行费用低、无粉尘污染的优点。经除尘设备处理后废气中粉尘浓度小于8 mg/m3,达到了《工作场所有害因素职业接触限值第1部分:化学有害因素》(GBZ 2.1-2019)的排放浓度要求。The composition of the coating was introduced, the common conveying means of powder material are compared, the pneumatic conveying technology was used to transport the powder in the coating factory. The results showed that: Pneumatic conveying technology has the advantages of high conveying efficiency, low investment and operation cost, and no dust pollution. After treatment by dust removal equipment, the concentration of dust in the exhaust gas is less than 8 mg/m3 to meet the discharge standard of《Occupational exposure limits for hazardous agents in the workplace Part 1: Chemical hazardous agents》(GBZ 2.1-2019).

关 键 词：建筑涂料 气力输送技术 旋转给料器 粉尘处理 职业卫生 环境保护 

分 类 号：TQ[化学工程]