检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:谢居应 胡磊 杜晟 马非[2] XIE Juying;HU Lei;DU Sheng;MA Fei(Chongqing Expressway Group Southeast Operation Branch,Chongqing 404100,China;China Merchants Chongqing Transportation Research and Design Institute Co.,Ltd.,Chongqing 400067,China)
机构地区:[1]重庆高速集团东南营运分公司,重庆404100 [2]招商局重庆交通科研设计院有限公司,重庆400067
出 处:《交通节能与环保》2021年第3期111-114,128,共5页Transport Energy Conservation & Environmental Protection
摘 要:隧道照明系统是影响行驶安全和舒适的重要因素,良好的照明环境是隧道运营安全的有力保障。然而隧道照明系统的电能消耗一般占隧道总电能消耗的70%以上,巨大的电费支出往往成为运营单位的重要负担。随着交通量的增加,隧道照明系统须进行亮度的提升,在提升亮度的同时必须考虑照明系统的智能化调控,以做到“按需照明”,避免过度照明造成的无效电能消耗。本文针对某隧道的照明系统改造升级方案,通过数值模拟预估了其实施后的亮度水平,基于“按需照明”的理念,提出了降低电能消耗的技术方案和路线。The tunnel lighting system is an important factor that affects driving safety and comfort,and a good lighting environment is a powerful guarantee for the safety of tunnel operations.However,the electrical energy consumption of the tunnel lighting system generally accounts for more than 70%of the total electrical energy consumption of the tunnel,and huge electricity expenses often become an important burden for the operating unit.With the increase in traffic volume,the tunnel lighting system must increase the brightness.While increasing the brightness,the intelligent control of the lighting system must be considered to achieve"on-demand lighting"and avoid ineffective power consumption caused by excessive lighting.Aiming at the renovation and upgrading plan of a tunnel's lighting system,this paper estimates its brightness level after implementation through numerical simulation.Based on the concept of"on-demand lighting",technical solutions and routes to reduce power consumption are proposed.
分 类 号:U453.7[建筑科学—桥梁与隧道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.26