提高0.35mm硅钢片落料模寿命的方案研究与应用  

Research and Application of Improvement the Service Life of Blanking Die for 0.35mm Silicon Steel Sheet

作　　者：曾顺 Zeng Shun(Dongfang Electric Machinery Co.,Ltd.,Deyang,Sichuan 641008,CHN)

机构地区：[1]东方电气集团东方电机有限公司,四川德阳641008

出　　处：《模具制造》2021年第6期4-6,共3页Die & Mould Manufacture

摘　　要：针对0.35mm硅钢片的冲裁加工难点,为提高落料模具寿命与单次冲裁次数,通过对模具材料优化,设计出包含两种模块材料并配合多间隙的模具组合优化研究方案,并通过一副定子冲片落料模具对该方案进行了验证,获得针对0.35mm硅钢片的模具优化设计方案,其冲裁次数及模具寿命均得到提高。In view of the blanking difficulties of 0.35mm silicon steel sheet,in order to improve the blanking die life and single blanking times,this topic,through the optimization of the selection of die material,designs a combination optimization research scheme with a pair of die containing two kinds of module materials and multi gaps,and verifies the scheme through a pair of stator blanking die,and obtains the die optimization design scheme for 0.35mm silicon steel sheet whose single blanking times and die life are improved.

关 键 词：0.35mm硅钢片 落料模 多间隙 寿命 

分 类 号：TG385.2[金属学及工艺—金属压力加工]