检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:董俐言 杨彩青 张杰[1] 祁峰[1] Dong Liyan;Yang Caiqing;Zhang Jie;Qi Feng(Beijing Institute of Architectural Design,Beijing,China;不详)
机构地区:[1]北京市建筑设计研究院有限公司
出 处:《暖通空调》2021年第6期13-20,共8页Heating Ventilating & Air Conditioning
基 金:“十三五”国家重点研发计划项目“公共交通枢纽建筑节能关键技术与示范”(编号:2018YFC0705000)。
摘 要:以严寒地区某机场航站楼为模型,分析了其在各气候区典型城市设计工况下的空调负荷构成,进而分析了围护结构热工参数、室内设计温度、人员密度、新风量指标等因素对冷热负荷的影响程度,并对系统负荷和末端负荷的差异进行了探讨。结果表明:围护结构负荷、新风负荷和人员负荷是空调负荷的主要组成部分,人员密度和新风量指标对空调负荷影响较大,不同气候区各因素对空调负荷的影响程度有所差别,设计冷热源和末端设备时宜对空调负荷进行适当修正。Taking an airport terminal building in severe cold zone as a model,analyses the air conditioning load composition under typical urban design conditions in various climatic zones,and then analyses the influence of envelope thermal parameters,indoor design temperature,personnel density,outdoor air rate index on cooling and heating load,and discusses the difference between system load and terminal load.The results show that the envelope load,outdoor air load and personnel load are the main components of air conditioning load,and the personnel density and outdoor air rate index have a great impact on air conditioning load.The influence of various factors on air conditioning load in different climatic zones is different.The air conditioning load should be appropriately modified in the design of cold and heat sources and terminal equipment.
关 键 词:航站楼建筑 设计工况 空调负荷 影响因素 系统负荷
分 类 号:TU831.8[建筑科学—供热、供燃气、通风及空调工程] V351.1[航空宇航科学与技术—人机与环境工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15