检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘哲[1] 邹同华[1] 梁永伟 董艳红 Liu Zhe;Zou Tonghuan;Liang Yongwei;Dong Yanhong(Tianjin Key Laboratory of Refrigeration Technology,Tianjin University of commerce;Beijing Zhongleng Hightech RE Co.,Ltd.)
机构地区:[1]天津市制冷技术重点实验室天津商业大学 [2]北京中冷高科制冷设备有限公司
出 处:《制冷与空调》2021年第5期45-50,共6页Refrigeration and Air-Conditioning
摘 要:结合实际工程项目,基于COMSOL Multiphysics软件对间接制冷系统的热回收水箱进行了数值模拟仿真和试验测试,分析了热回收水箱的换热性能。对比分析试验结果与模拟结果,得出了模拟值与测量值最大温差为4 K,温差范围在1.3%内,试验结果验证了模型的可靠性,该模型具有一定的参考价值。根据试验结果和数值模拟结果对换热水箱进行了优化设计,提高了热回收水箱中温度分布的均匀性。Combined with actual engineering projects, the heat recovery water tank of the indirect refrigeration system was numerically simulated by the COMSOL Multiphysics software and experimentally tested, and analyzed the heat exchange performance of the heat recovery water tank By comparing and analyzing the experimental and simulation results. We know the maximum temperature difference between the simulated value and the measured value is 4 K,and the temperature difference range is within 1.3%. The experimental results verify the reliability of the model, which has certain reference value.According to the experimental results and numerical simulation results, the heat exchange water tank is optimized to improve the uniformity of the temperature in the heat recovery water tank.
分 类 号:TB6[一般工业技术—制冷工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7