金属漆彩色涂层钢板边部增厚缺陷研究  

Study on Edge-thickening Defect of Prepainted Steel Sheets Coated with Metallic Paint

作　　者：白会平 刘星 周小舟 Bai Huiping;Liu Xing;Zhou Xiaozhou(Wuhan Branch of Baosteel Central Research Institute (R&D Center of Wuhan Iron and Steel Company Limited), Wuhan 430080, Hubei;Cold Rolling Mill of Baosteel Wuhan Iron and Steel Company Limited, Wuhan 430081, Hubei)

机构地区：[1]宝钢股份中央研究院(武钢有限技术中心),湖北武汉430080 [2]宝钢股份武汉钢铁有限公司冷轧厂,湖北武汉430081

出　　处：《武汉工程职业技术学院学报》2021年第2期12-14,18,共4页Journal of Wuhan Engineering Institute

摘　　要：分析银色聚酯金属漆彩板边部增厚成因,结果表明,金属漆涂料里含有大量的产生金属效果的铝粉颜填料,铝粉粒径较大,且成片状排列,涂敷在带钢表面后在流平阶段涂料在带钢边部聚集增厚,导致边部极易产生堆边和气泡缩孔缺陷。根据金属漆涂料的特性,通过优化调整正面涂层膜厚分配比、增加流平时间,提高金属漆涂料的分散性,制定合适的生产工艺,使边部涂料溶剂充分挥发,解决金属漆彩板边部增厚缺陷。The paper studied edge-thickening defect of prepainted steel sheets coated with metallic paint.The results showed that the uneven distribution of Al pigment led to these defects because the aluminum powders gathered at the edge.Considering the characteristics of metallic paint,solvent of the edge coating was fully volatilized edge-thickening defect was solved by optimizing and adjusting the thickness distribution ratio of the finishing coat and increasing paint leveling time and the dispersion of metallic paint.

关 键 词：彩板金属漆 厚边缺陷 铝粉 

分 类 号：TG157[金属学及工艺—热处理]