预制装配式管廊横向接头力学性能数值分析  

Numerical Analysis of Mechanical Properties of Transverse Joint for Segmented Precast Utility Tunnel

作　　者：谭琳 孔杰威 郑小红[2] 劳伟康 高振宇 Tan Lin;Kong Jiewei;Zheng Xiaohong;Lao Weikang;Gao Zhenyu(Bejjing Municipal Engineering Design&Research Institute Co.Ltd.,Guangdong Branch,Guangzhou 510060,China;School of Civil Engineering&Transportation,South China University of Technology,Guangzhou 510060,China;Guangdong Xinlu Environment Protection Engineering Co.,Ltd.,Guangzhou 510060,China)

机构地区：[1]北京市市政工程设计研究总院有限公司广东分院,广州510060 [2]华南理工大学土木与交通学院,广州510640 [3]广州鑫绿工程技术有限公司,510060

出　　处：《特种结构》2021年第3期69-74,共6页Special Structures

基　　金：广东省住房和城乡建设厅应用基础研究项目(2020-K16-035774)。

摘　　要：以广州市天河智慧城预制装配式管廊工程为背景,对上下分体节段管廊横向接头的受力进行数值分析。通过有限元分析,建立横向接头的等效模型,得到接头处抗弯刚度、抗剪刚度参数;以弹簧单元模拟,建立了考虑横向接头的管廊梁-弹簧简化模型,与整体框架模型进行对比分析,结果表明:装配力较小时,横向接头对管廊整体受力相当于铰的作用,能有效减少跨中正弯矩,但增加侧壁两端的负弯矩;随着装配力增加,铰接作用减弱。综合考虑管廊总体受力、接缝防水要求、橡胶材料性能,提出了本项目合理的装配力范围,为该综合管廊的设计和施工提供依据,也为同类工程提供参考。Based on a project constructed in Tianhe Zhihui District in Guangzhou,the mechanical properties of transverse joints between the upper and lower segmented precast utility tunnel was analyzed by finite element(FEM) in this study.The equivalent model of the transverse joint was established,and the bending stiffness and shear stiffness of the joint were obtained by FEM.A simplified beam-spring model with the spring element simulation of utility tunnel considering transverse joints was established and compared with the whole frame model.The results showed that the overall force of the transverse joint on the utility tunnel was equivalent to the effect of hinge when the assembly force was small,which can effectively reduce the mid-span positive bending moment,but increase the negative bending moment at both ends of the side wall.The effect of hinging becomes weaker as the assembly force increases.Considering the overall force of the precast utility tunnel,the joint waterproof requirements and the rubber material properties,the reasonable assembly force range of this project was put forward finally,which should provide a basis for the design and construction of the precast utility tunnel,and also provide a reference for similar projects.

关 键 词：装配式综合管廊 横向接头 PC钢棒 装配力 

分 类 号：TU990.3[建筑科学—市政工程]