工业氢氧化铝制备铝酸钠实验研究  

Experimental Study on Sodium Aluminate Preparationby Industrial Aluminum Hydroxide

作　　者：李小英 杨妮 杨振 林琳 LI Xiao-ying;YANG Ni;YANG Zhen;LIN Lin(Kunming Metallurgical Research Institute Co.,Ltd.,Kunming,Yunnan 650031,China;State Key Laboratory of Pressure Hydrometallurgical Technology of Associated Nonferrous Metal Resources,Kunming,Yunnan 650503,China)

机构地区：[1]昆明冶金研究院有限公司,云南昆明650031 [2]共伴生有色金属资源加压湿法冶金技术国家重点实验室,云南昆明650503

出　　处：《云南冶金》2021年第3期66-70,共5页Yunnan Metallurgy

基　　金：云南省科研院所技术开发研究专项(2019DC002)。

摘　　要：以工业氢氧化铝为原料,通过碱溶制备铝酸钠溶液。实验考察了反应时间、反应温度、液固比和苛性比值等因素条件对铝、硅和铁溶出率的影响,确定了适宜的溶出条件。在反应时间60 min,反应温度100℃,液固比3∶1,搅拌转速300 r/min,苛性比值1.5的条件下,铝的溶出率达到98%以上,硅的溶出率小于10%,铁的溶出率小于1.5%。The industrial aluminum hydroxide is taken as the raw material,the sodium aluminate solution is prepared by alkali dissolution.The effect of reaction time,reaction temperature,liquid-solid ratio,caustic ratio and the other factors on aluminum,silicon and iron's dissolution rate were investigated through the experiment,and the appropriate dissolution conditions were also confirmed.When the reaction time is 60 min,the reaction time is 100℃,the liquid-solid ratio is 3:1,the stirring speed is 300 r/min,the caustic specific value is 1.5,under the above mentioned conditions,the dissolution rate of aluminum is more than 98%,the dissolution rate of silicon is less than 10%,the dissolution rate of iron is less than 1.5%.

关 键 词：氢氧化铝 铝酸钠 溶出率 

分 类 号：TF821[冶金工程—有色金属冶金]