电铅烟气环保特排限值治理研究及应用  

Study and Application on Environment Protection Treatment for Special Emission Limit Values of Electric Lead Fume

作　　者：谢益民 廖若博 XIE Yi-ming;LIAO Ruo-bo(Yunnan Chihong Zn&Ge Co.,Ltd.,Qujing,Yunnan 655011,China;Department of Safety,Environmental Protection and Health,China Copper Co.,Ltd.,Kunming,Yunnan 650000,China)

机构地区：[1]云南驰宏锌锗股份有限公司,云南曲靖655011 [2]中国铜业有限公司安全环保健康部,云南昆明650000

出　　处：《云南冶金》2021年第3期138-142,共5页Yunnan Metallurgy

基　　金：国家环保部重金属污染防治专项资金项目(云环发〔2013〕41号)。

摘　　要：《铅、锌工业污染物排放标准》(GB 25466-2010)执行特排限值后,对电铅产生烟气采用了塑烧板除尘技术,处理后铅及其化合物均稳定并优于标准特别排放限值。探析了工程化应用问题和应对措施,针对烟气糊板难题,拟采用烟气调质,在塑烧板除尘器前段设计、配置高效反应器等优化设计。The plastic sintered board dust removal technology is adopted for electric lead fume,because of the special emission limit values are stipulated in Emission standard of pollutants for lead and zinc industry(GB 25466-2010),the treated lead and its compound is stable and better than the special emission limit standard values.The engineering application ways and countermeasures are discussed and analyzed for problem of burned plate by fume,we will adjust the fume quality,design and arrange high efficient reactor and the other optimal design at the front end of plastic sintered board dust remover.

关 键 词：电铅烟气 特排限值 塑烧板除尘 系统优化 

分 类 号：TU834.634[建筑科学—供热、供燃气、通风及空调工程]