检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张彬[1] 周博文 童晖[1] 陈祥全 王佳麟[1] ZHANG Bin;ZHOU Bowen;TONG Hui;CHEN Xiangquan;WANG Jialin(Shanghai Acoustic Laboratory,Institute of Acoustic,Chinese Academy of Science,Shanghai 201815,China)
机构地区:[1]中国科学院声学研究所东海研究站,上海201815
出 处:《声学技术》2021年第3期435-438,共4页Technical Acoustics
基 金:中科院声学所青年英才计划资助(QNYC201826)项目。
摘 要:文章主要研究了一种低旁瓣圆形活塞高频换能器,采用去环非均匀分布方法实现低旁瓣,推导了去环非均匀圆形活塞换能器的指向性函数表达式,建立了指向性仿真模型,并采用Matlab软件进行仿真优化,对不同去环位置和不同去环宽度的圆形活塞换能器旁瓣级变化规律进行了分析,并通过添加匹配层拓展带宽。制作了一款低旁瓣圆形活塞宽带高频换能器,并进行测量。实测结果与仿真基本一致,换能器实测最大旁瓣级为−22.4 dB,较均匀圆形活塞换能器旁瓣级降低了4.8 dB,中心频率为325 kHz,−3 dB带宽为150 kHz。In this paper,the circular piston high-frequency transducer with low side-lobes is studied.The low side-lobe is realized by the non-uniform ring-removal method for the circular piston transducer and the corresponding directivity expression is derived.The directivity simulation model of non-uniform ring-removed circular piston transducer is established and optimized with Matlab.The variation of side-lobes with ring-removed position and width on the circular piston transducer is analyzed,and the bandwidth is expanded by adding matching layer.The low side-lobe broadband circular piston high-frequency transducer is prepared and measured,and the measurement results are basically in agreement with the simulation results.The measured maximum side-lobe of the transducer is−22.4 dB,which is 4.8 dB lower than that of the uniform piston array.The measured center frequency of the transducer is 325 kHz,and the−3 dB bandwidth is 150 kHz.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.198