检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:宋敏 张杰[1,2] 陈青青 王志勇[1,2] 王志华 SONG Min;ZHANG Jie;CHEN Qingqing;WANG Zhiyong;WANG Zhihua(Institute of Applied Mechanics,College of Mechanical and Vehicle Engineering,Taiyuan University of Technology,Taiyuan,Shanxi 030024,China;Shanxi Key Laboratory of Material Strength&Structural Impact,Taiyuan University of Technology,Taiyuan 030024,Shanxi,China;School of Civil Engineering,Qinghai University,Xining 810016,Qinghai,China)
机构地区:[1]太原理工大学机械与运载工程学院应用力学研究所,山西太原030024 [2]太原理工大学材料强度与结构冲击山西省重点实验室,山西太原030024 [3]青海大学土木工程学院,青海西宁810016
出 处:《爆炸与冲击》2021年第6期55-64,共10页Explosion and Shock Waves
基 金:国家自然科学基金(11702186;11390362);青海省科技计划项目(2017-ZJ-783)。
摘 要:动态加载下,混凝土中钢筋的阻裂性能一直是冲击动力学研究领域的难点之一。利用落锤试验机对含缺口的混凝土少筋梁进行三点弯曲试验,分析了不同加载速率下梁的冲击力、跨中挠度、混凝土起裂应变率和钢筋应变。实验结果表明:在一定加载速率范围内(0.885~1.252 m/s),混凝土预制裂缝尖端的裂纹起裂应变率、冲击力最大值、跨中挠度峰值与加载速率呈线性增长关系,当加载速率增至1.771 m/s时,增长趋势减弱;冲击力卸载时,钢筋部分弹性变形恢复导致裂纹产生闭合,裂纹嘴张开位移逐渐减小至恒定值,对裂纹嘴张开位移峰值前的部分曲线进行拟合后得到裂纹嘴张开位移率,结果表明裂纹嘴张开位移率随加载速率的提高而线性增大。Under impact loads,the crack resistance of reinforcement in concrete is the focus of impact dynamics research.In this study,the three-point bending tests of lightly reinforce concrete beams with notch were conducted with a drop hammer testing machine.The high speed camera and digital image correlation(DIC)technology were applied to catch the fracture process and analyse the displacement field.The shape and geometry of the specimen followed the RILEM recommendation,i.e.,150 mm×150 mm in cross section,800 mm in length,notch-depth ratio was around 1/3 and span was kept constant 600 mm.And the impact force,mid-span deflection,steel strain beneath the loading point and concrete strain at the notch tip were measured over four loading rates.The experiment results showed that the crack initiation strain rate increased linearly with the loading rate,and the growth trend weakened when loading rate was 1.771 m/s.Based on the test results,the empirical formula of crack initiation strain rate with respect to loading rate was given,which was meaningful to simulate the crack initiation in concrete under dynamic loading.In addition,with the increase of loading rate,the steel yielded gradually,which resulted in the response time difference between impact force and steel strain decreased.With the recovery of elastic deformation of steel bars,the crack started to close and the macro crack became visible clearly.Meanwhile,the crack mouth opening displacement(CMOD)declined to a constant value after reaching the maximum value.Then,the crack mouth opening displacement rate was obtained from the fitting curve,and a linear growth relationship between CMOD rate and loading rate was founded.The failure process of the lightly reinforced beams was analyzed based on the CMOD rate,which provided an idea for comparing the fracture process of the beam under dynamic and static loads.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.190