枸杞采摘机机架有限元分析  

Finite Element Analysis of the Frame of a Lycium Barbarum Picker

作　　者：孙浩博 胡明明 胡忠强 李声元 赵永彪 黄晓鹏 万芳新 SUN Hao-bo;HU Ming-ming;HU Zhong-qiang;LI Sheng-yuan;ZHAO Yong-biao;HUANG Xiao-peng;WAN Fang-xin(College of Mechanical and Electrical Engineering,Gansu Agricultural University,Lanzhou Gansu 730070,China;Zhejiang Sifang Co.,Ltd.,Yongkang Zhejiang 321000,China)

机构地区：[1]甘肃农业大学机电工程学院,甘肃兰州730070 [2]浙江四方股份有限公司,浙江永康321000

出　　处：《林业机械与木工设备》2021年第7期30-35,共6页Forestry Machinery & Woodworking Equipment

基　　金：甘肃省科技厅重点研发项目“自走式枸杞收获机的研制”(20YF3NA033)。

摘　　要：机架是枸杞采摘机主要的承载部件,必须满足强度、刚度、稳定性等要求。本研究利用Ansys Workbench对自主设计的枸杞采摘机机架进行了有限元分析,包括静态结构分析和模态分析。结果显示,工作中机架产生的最大应力约为80 MPa,满足强度要求,枸杞采摘机机架的前十阶模态分析中,一阶模态的固有频率最低,约为30 Hz,远离枸杞采摘机10~13.5 Hz的振动频率范围,工作时不会发生共振现象。研究可为枸杞采摘机结构优化提供参考。The frame is the main load-bearing component of the Lycium barbarum harvester and must meet the requirements of strength,stiffness and stability.This study uses Ansys Workbench to carry out finite element analysis,including static structural analysis and modal analysis,on the independently designed Lycium barbarum harvester frame.The results show that the maximum stress generated by the frame during operation is about 80MPa,which meets the strength requirements.The inherent frequency of the first order mode of the frame in the first ten order modal analysis of the Lycium barbarum harvester is about 30 Hz,which is far away from the vibration frequency range of 10~13.5 Hz of the Lycium barbarum harvester,and no resonance phenomenon will occur during operation.

关 键 词：枸杞 采摘机机架 有限元 模态分析 

分 类 号：TG659[金属学及工艺—金属切削加工及机床]