JMatPro辅助的临氢钢成分设计  

JMatPro Assisted Composition Design of 12Cr2Mo1VR Steel

作　　者：赵春尧 李艳梅[1] 宋明辉 张计谋 徐琛[2] ZHAO Chunyao;LI Yanmei;SONG Minghui;ZHANG Jimou;XU Chen(The State Key Laboratory of Rolling Automation,Northeastern University,Shenyang 110819,China;Hunan Valin Xiangtan Iron and Steel Co.,Ltd.,Xiangtan 411101,China)

机构地区：[1]东北大学,轧制技术及连轧自动化国家重点实验室,辽宁沈阳110819 [2]湖南华菱湘潭钢铁有限公司,湖南湘潭411101

出　　处：《金属材料与冶金工程》2021年第3期3-9,共7页Metal Materials and Metallurgy Engineering

基　　金：“十三五”国家重点研发项目(2017YFB0305301)。

摘　　要：Cr-Mo配比对于临氢压力容器用Cr-Mo钢的力学性能具有重要意义,利用JMatPro软件,模拟计算了五种Cr-Mo配比对150mm厚度规格12Cr2Mo1VR临氢压力容器钢板连续冷却相变、淬透性曲线、钢中碳化物析出类型以及元素分布的影响规律,从而确定出较合适的Cr-Mo配比,为150mm厚度规格的12Cr2Mo1VR特厚钢板的合金成分设计提供理论依据,为180 mm规格特厚板的开发打好理论基础。结果表明:Cr-Mo质量配比为2.25%Cr-1%Mo的实验钢可以获得全部贝氏体组织,淬透性良好,回火后析出碳化物MC、M23C6和M7C3比例最大。The Cr-Mo ratio is of great significance to the mechanical properties of Cr-Mo steels used in hydrogen pressure vessels.With JMatPro software used,five kinds of Cr-Mo ratios are simulated and their effect on continuous cooling phase transformation,hardenability curve,carbide precipitation type and element distribution of 150 mm thick 12Cr2Mo1VR hydrogen pressure vessel steels plates is studied.And a suitable Cr-Mo ratio is determined,which provides a theoretical basis for the alloy design of the 150 mm thick 12Cr2Mo1VR extra-thick steel plate and builds theoretical foundation for the development of 180mm thick plates.The results show that the experimental steel with a mass ratio of Cr-Mo of 2.25%Cr-1%Mo will obtain total bainite structure with good hardenability and the largest proportion of precipitated carbides MC,M23C6 and M7C3 after tempering.

关 键 词：12Cr2Mo1VR JMatPro软件 模拟计算 析出相 

分 类 号：TG142.4[一般工业技术—材料科学与工程]