铝合金加筋板轮印载荷的简化等效模型  

Simplified equivalent model of wheel load of aluminum alloy stiffened plate

作　　者：刘赛棚 王德禹[1,2] LIU Sai-peng;WANG De-yu(State Key Laboratory of Ocean Engineering,Shanghai Jiaotong University,Shanghai 200240,China;Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration,Shanghai 200240,China)

机构地区：[1]上海交通大学海洋工程国家重点实验室,上海200240 [2]上海交通大学高新船舶与深海开发装备协同创新中心,上海200240

出　　处：《舰船科学技术》2021年第6期66-73,共8页Ship Science and Technology

摘　　要：将轮印载荷等效处理为接触区域内的均布压力是目前大多数研究通常采用的方法,但简化的均布压力与实际的接触压力明显不同。基于此,本文以子午线轮胎-铝合金加筋板为研究对象,模拟现实中不同轮胎压载方式下产生的轮印载荷。基于能量法提出使用补偿系数β的圆形均布压力代替实际轮印载荷的等效简化方法,讨论不同加载工况、轮印位置、加筋板结构参数对补偿系数β的影响,最后通过具体的工况算例分别从加载区域、加筋板的最大应力值、加筋板上应力状态分布,验证均布加载补偿系数β的合理性。研究结果表明,本文提出的方法可以有效替代为轮印载荷的简化等效模型,并且与基于规范的计算相比,该方法的计算精度更高。本文提出的补偿系数β用于加筋板最大应力值的预测时,预测精度平均提升33.99%,对此类甲板设计以及强度计算有较好的实际工程应用价值。The equivalent treatment of the wheel load to the uniform pressure in the contact area is the method commonly used in most studies at present,but the simplified uniform pressure is significantly different from the actual contact pressure.Based on this,this paper takes radial tire-aluminum alloy stiffened plate as the research object,and simulates the wheel load under different tire ballasting methods in reality.Based on the energy method,an equivalent simplified method is proposed to replace the actual wheel load with a circular uniform pressure of compensation coefficientβ.The effects of different loading conditions and stiffened plate structural parameters on the compensation coefficientβare discussed;Finally,a concrete example of working conditions was used to verify the rationality of the uniformly distributed load compensation coefficientβfrom the loading area,the maximum stress value of the stiffened plate,and the stress state distribution on the stiffened plate.The research results show that the compensation coefficientβproposed in this paper can effectively achieve the equivalent treatment of wheel pressure load,and the calculation accuracy of this method is higher than the calculation based on the specification.In addition,when the compensation coefficientβproposed in this paper is used to predict the maximum stress value of the stiffened plate,the prediction accuracy is improved by 33.99%on average.It has good practical engineering application value for such deck design and strength calculation.

关 键 词：轮印载荷 轮胎-铝合金加筋板 等效处理 补偿系数β 

分 类 号：U663[交通运输工程—船舶及航道工程]