基于Witness的采煤机驱动齿轮加工过程仿真研究  

A Simulation Study on Machining Process of Shearer Drive Gear Based on Witness

作　　者：任广玉 Ren Guangyu(Xishan Coal Power Group Co.,Ltd.,Taiyuan Shanxi 030053)

机构地区：[1]西山煤电集团有限责任公司,山西太原030053

出　　处：《机械管理开发》2021年第6期48-49,共2页Mechanical Management and Development

摘　　要：为了解决采煤机驱动齿轮加工效率低的问题,利用Witness仿真模拟软件对采煤机驱动齿轮的加工过程进行仿真研究,通过对驱动齿轮的加工步骤进行分析设定了仿真模拟研究的前期准备工作;为了降低加工设备的负载率和提升产量,对加工时间及设备数量进行了一定的优化分析,发现优化设备数量可以降低设备的负载率,降低加工时间,提升部件的生产率。同时优化两个因素后设备的利用率及产出率均有了大幅度的提升,有效地降低了设备负载大、逗留率高的问题,优化效果明显。In order to solve the problem of low machining efficiency of shearer drive gear, the machining process of shearer drive gear is simulated by Witness simulation software. In order to reduce the load rate and increase the output of the processing equipment, the processing time and the number of equipment are optimized. After optimizing the two factors, the utilization rate and output rate of the equipment have been greatly improved, which effectively reduces the problems of large load and high stay rate of the equipment, and the optimization effect is obvious.

关 键 词：采煤机 驱动轮生产线 WITNESS 仿真优化 

分 类 号：TD421.6[矿业工程—矿山机电]