基于爆破漏斗试验的采场凿岩爆破参数优化研究  

Optimization Study on Rock Drilling Blasting Parameters Based on Blasting Funnel Test

作　　者：文兴 赵亮 朱青凌 栗盼平 WEN Xing;ZHAO Liang;ZHU Qingling;LI Panping(Changsha Institute of Mining Research Co.,Ltd,Changsha,Hunan 410012,China;State Key Laboratory of Metal Mine Safety Technology,Changsha,Hunan 410012,China;Xinjiang Ashele Copper Mine Co.,Ltd,Habahe Country,Xinjiang 836700,China)

机构地区：[1]长沙矿山研究院有限责任公司,湖南长沙410012 [2]金属矿山安全技术国家重点实验室,湖南长沙410012 [3]新疆哈巴河阿舍勒铜业股份有限公司,新疆哈巴河县836700

出　　处：《矿业研究与开发》2021年第7期28-31,共4页Mining Research and Development

基　　金：国家重点研发计划重点专项项目(2017YFC0S04100)。

摘　　要：阿舍勒铜矿深部采用大直径深孔爆破落矿,为了提高采场爆破质量,确定适用于深部大直径深孔爆破崩矿的爆破参数。在井下现场开展了单孔系列爆破、宽孔距同段爆破和斜面台阶爆破试验,得出了当前矿岩条件下的药包最佳埋深为0.66 m,最佳爆破漏斗体积为0.42 m^(3),最佳炸药单耗为0.37 kg/t,最小抵抗线合理范围为3.19-3.60 m。根据相似理论,对深部采场大直径深孔爆破的参数进行了分析和优化,按照优化后的采场爆破参数进行了工业试验。工业试验取得了良好的爆破效果,采场边界较完整,矿石块度均匀,贫化率仅为5.94%,损失率为3.99%。Large-diameter deep-hole blasting caving is adopted in the deep part of Ashele Copper Mine. In order to improve the blasting quality of stope, the blasting parameters suitable for the large-diameter deep-hole blasting caving in deep stope were determined. The tests of single-hole series blasting, wide-hole interval blasting in the same section and inclined bench blasting were carried out in the underground field. The results show that the optimal buried depth of the charge under the current ore-rock conditions is 0.66 m, the optimal blasting funnel volume is 0.42 m^(3), the optimal explosive unit consumption is 0.37 kg/t, and the reasonable range of the minimum resistance line is 3.19~3.60 m. According to the similarity theory, the parameters of large-diameter deep-hole blasting in deep stope were analyzed and optimized, and the industrial test was carried out according to the optimized stope blasting parameters. Industrial test has achieved a good blasting effect, with complete stope boundary and uniform ore block. The ore dilution rate is only 5.94%, and the loss rate is 3.99%.

关 键 词：爆破漏斗试验 大直径深孔爆破 爆破参数优化 工业试验 

分 类 号：TD235.4[矿业工程—矿井建设]