高速飞剪主传动齿轮消隙机构对剪刃间隙和重合度的影响及改进  

INFLUENCE AND IMPROVEMENT OF CLEARANCE ELIMINATION DEVICE OF MAIN VTRANSMISSION GEAR OF HIGH SPEED FLYING SHEAR ON KNIFE CLEARANCE AND OVERLAP

作　　者：秦小龙[1] Qin Xiaolong(Shougang Jingtang Iron&Steel Joint Co.,Ltd.Tangshan 063200,China)

机构地区：[1]首钢京唐钢铁联合有限责任公司,唐山063200

出　　处：《冶金信息导刊》2021年第3期63-66,41,共5页Metallurgical Information Review

摘　　要：首钢京唐公司连铸连轧生产线投产后,由于剪鼓装配的消隙机构装配精度问题两次剪切不断造成堆钢。针对该问题,对高速飞剪剪鼓装配的消隙机构进行了分析。按照分析结果,制定改进方案,使用效果良好,为同类设备类似问题提供参考借鉴。After the continuous casting and rolling production line of Jingtang Company of Shougang was put into operation,the high speed flying shears for two times caused continuous stacking due to assembly accuracy problem of the clearance elimination device of the shear sassette.In order to solve this problem,the clearance limination device of the shear sassette of the high speed flying shear were analyzed.According to the analysis results,the improvement scheme was developed,and the application effect was good,providing reference for similar problems of similar equipment.

关 键 词：高速飞剪 剪榖装配 装配精度 消隙机构 

分 类 号：F42[经济管理—产业经济]