检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李苏航 苏玉婷 刘冬冬 Li Suhang;Su Yuting;Liu Dongdong(Investingation and Planning of Soil and Water Conservation in Shaanxi Province,Xi'an 710004,Shaanxi;Northwest Engineering Corporation Limited,Xi'an 710065,Shaanxi)
机构地区:[1]陕西省水土保持生态环境监测中心,陕西西安710004 [2]中国电建集团西北勘测设计研究院有限公司,陕西西安710065
出 处:《陕西水利》2021年第7期14-16,20,共4页Shaanxi Water Resources
摘 要:根据《滇中引水工程丽江市水资源综合利用配套工程古城区金安桥库区提水工程初步设计报告(报批稿)》(2020年10月),初设阶段应对泵站水力机械设备进行复核计算,本次主要进行水泵运行工况分析(以一级泵站为例),即水泵工作点计算,电机功率复核计算,泵站装置效率计算,水泵安装高程计算。通过计算,为初设阶段工程设计提供依据。According to the“Preliminary Design Report of the Jin anqiao Reservoir Area in the Ancient City District of the Lijiang Water Resources Comprehensive Utilization Project(Draft for Approval)”(October 2020).The hydraulic machinery and equipment of the pumping station should be rechecked and calculated at the initial stage.This time,we mainly analyze the operating conditions of the pump(take the first-stage pumping station as an example),that is,the calculation of the pump operating point,the calculation of the motor power,the calculation of the efficiency of the pumping station,and the calculation of the installation elevation of the pump.Through the calculation,it provides the basis for the engineering design in the preliminary design stage.
关 键 词:运行工况 水泵工作点 电机功率复核 泵站装置效率 安装高程
分 类 号:TV672.5[水利工程—水利水电工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.135.190.163