NaHSO3强化Fe2+/过硫酸盐体系处理铬黑T废水的优化  

Optimization of NaHSO enhanced Fe/persulfate system for treatment of eriochrome black T wastewater by response surface methods

作　　者：安帅 李海松[1] An Shuai;Li Haisong(College of Ecology and Environment,Zhengzhou University,Zhengzhou 450001,China)

机构地区：[1]郑州大学生态与环境学院,河南郑州450001

出　　处：《工业水处理》2021年第7期112-116,共5页Industrial Water Treatment

摘　　要：采用亚硫酸氢钠(NaHSO3)强化Fe^(2+)/过硫酸盐(PS)体系降解铬黑T(EBT)。基于单因素实验结果,以Fe^(2+)浓度、NaHSO3投加量和PS浓度作为考察因素,EBT去除率为响应值,采用Box-Behnken响应曲面法建立二次数学模型,分析各因素及其交互作用对EBT降解的影响。在模型优化条件,即Fe^(2+)浓度0.08 mmol/L、NaHSO3投加量0.90mmol/L、PS浓度1.00 mmol/L条件下,预测EBT去除率为93.7%。验证实验平均结果为92.76%,与预测值偏差为0.94%。Eriochrome black T(EBT) was degraded by strengthening Fe^(2+)/persulfate(PS) system with sodium bisulfite(NaHSO3). Based on single factor experimental results,Fe^(2+) concentration,NaHSO3 dosage and PS concentration were selected as the investigation factors,and EBT removal rate was taken as response value,a quadratic mathematical model was established by Box-Behnken response surface method to analyze the influence of various factors and their interactions on EBT degradation. The optimal condition were Fe^(2+) 0.08 mmol/L,NaHSO3 dosage 0.90 mmol/L and PS 1.00 mmol/L respectively,and the predicted EBT removal rate was 93.7%. The average result of verification test was 92.76%,which had a deviation of 0.94% compared with the predicted value.

关 键 词：亚硫酸氢钠 过硫酸盐 铬黑T 响应曲面法 

分 类 号：TQ028.8[化学工程]