顶空气相色谱-质谱法测定ABS塑料玩具中丙烯腈和苯乙烯的残留量与迁移量  

Determination of Acrylonitrile and Styrene Residues and Migration in ABS Plastic Toys by Headspace Gas Chromatography-Mass Spectrometry

作　　者：魏梦夏 刘雅慧 陈萌 吕庆[1] 张庆[1] 王志娟[1] WEI Meng-xia;LIU Ya-hui;CHEN Meng;LÜ Qing;ZHANG Qing;WANG Zhi-juan(Institute of Industrial and Consumer Product Safety,Chinese Academy of Inspection and Quarantine,Beijing 100176,China;Ningdong Branch,Ningxia Institute of Metrology Quality Inspection,Yinchuan 750441,China)

机构地区：[1]中国检验检疫科学研究院工业与消费品安全研究所,北京100176 [2]宁夏计量质量检验检测研究院宁东分院,宁夏银川750441

出　　处：《分析测试学报》2021年第8期1190-1196,共7页Journal of Instrumental Analysis

基　　金：国家重点研发计划(2018YFF0214803);国家市场监督管理总局科技计划项目(2019MK126)。

摘　　要：该文建立了ABS塑料玩具中丙烯腈和苯乙烯两种单体残留量与迁移量的顶空气相色谱-质谱测定方法。首先对残留量测定方法的顶空平衡时间和平衡温度进行了优化,然后以模拟汗液和模拟唾液为迁移基质,对迁移量测定方法的顶空平衡时间、平衡温度、取样体积和盐析条件进行了优化,并将其应用于市售38件ABS玩具实际样品的检测。结果显示:残留量方法测定丙烯腈和苯乙烯的定量下限分别为0.4 mg/kg和1.0 mg/kg,0.4~2 000 mg/kg线性范围内相关系数(r^(2))不低于0.999 8,加标回收率为93.0%~108%,相对标准偏差(RSD)不高于7.2%。迁移量方法测定丙烯腈和苯乙烯的定量下限分别为1.0μg/L和0.05μg/L,0.05~100μg/L线性范围内相关系数(r^(2))不小于0.998 1,加标回收率为88.4%~104%,RSD≤9.5%。该方法简便、快速、灵敏、准确,适用于ABS玩具中丙烯腈和苯乙烯残留量与迁移量的测定。Acrylonitrile-Butadiene-Styrene(ABS)plastic is widely used in toy manufacturing industry.The chemical safety of ABS plastic toys is affected by the residual monomer without polymerization.In order to more accurately evaluate the chemical safety of ABS plastic toys and better protect children′s health and safety,a rapid,accurate and sensitive method for the determination of acrylonitrile and styrene residues and migration in ABS plastic toys was established,based on the headspace-gas chromatography-mass spectrometric(HS-GC-MS)technique.Firstly,the headspace equilibrium temperature and equilibrium time of the residue determination method were optimized.Results showed that the optimal equilibrium temperature was 110℃and the optimal equilibrium time was 15 min.Then,the headspace equilibrium temperature,equilibrium time,sampling volume and salting out conditions were optimized by using simulated sweat and simulated saliva as the migration medium.The results showed that the optimal conditions were as follows:equilibrium temperature 70℃,equilibrium time 30 min,sampling volume 10 mL and the salt amount 3.5 g.The limits of quantitation(LOQs)for determination of residual acrylonitrile and styrene were 0.4 mg/kg and 1.0 mg/kg,respectively.The correlation coefficients(r^(2))were greater than 0.9998 in the linear range of 0.4-2000 mg/kg.The recoveries were in the range of 93.0%-108%with relative standard deviations(RSDs)not more than 7.2%,while the LOQs for determination of acrylonitrile and styrene in the migration solution were 1.0μg/L and 0.05μg/L,respectively.The correlation coefficients(r^(2))were not less than0.9981 in the linear range of 0.05-100μg/L.The recoveries ranged from 88.4%to 104%,with RSDs not more than 9.5%.Finally,the method was applied to the determination of acrylonitrile and styrene monomer residues and migration in 38 ABS plastic toys.Styrene was detected in all 38 ABS toy samples,and acrylonitrile was not detected in only one of them.The residual amounts of acrylonitrile and styrene were in th

关 键 词：塑料玩具 丙烯腈 苯乙烯 残留量 迁移量 

分 类 号：O657.7[理学—分析化学]