特细砂配制海工高性能混凝土技术及应用  

Technology of Preparing Marine High-Performance Concrete with Superfine Sand and Its Application

作　　者：刘良合[1] 焦绪学 Liu Lianghe;Jiao Xuxue(The First Engineering Company of CCCC Fourth Harbor Engineering Co.,Ltd.,Guangzhou Guangdong 510500,China;China Road&Bridge Corporation,Beijing 100011,China)

机构地区：[1]中交四航局第一工程有限公司,广东广州510500 [2]中国路桥工程有限责任公司,北京100011

出　　处：《港工技术》2021年第4期116-120,共5页Port Engineering Technology

摘　　要：结合东非某项目,在只有细度模数1.4~1.5的特细砂作为细集料条件下配制C45高性能混凝土,通过调整特细砂砂率、掺入合适掺量粉煤灰、调整配合比、控制含泥量及混凝土入模温度等方式,配制出满足C45强度等级及电通量小于1000 C要求的泵送混凝土,同时解决了特细砂混凝土高温条件下干缩大、易开裂的问题。Based on one project in East Africa,high-performance concrete C45 is prepared with superfine sand as fine aggregate subject to the fineness modulus ranging from 1.4 to 1.5.The pumping concrete that reaches the strength grade of C45 and has the electric flux of less than 1000 C can be prepared by changing superfine sand ratio,adding appropriate amount of fly ash,adjusting mix proportion,controlling mud content and the temperature of concrete poured into the mould,which also solves the problems of large dry-shrinkage and easy cracking of superfine sand concrete under high temperature.

关 键 词：特细砂 高性能混凝土 泵送 砂率 

分 类 号：TU528[建筑科学—建筑技术科学]