Ni-Al-W三元镍基模型高温合金在热处理过程中显微结构的变化  

Evolution of microstructure of Ni-Al-W ternary nickel-based model superalloy in the heat treatment

作　　者：谭伟 张晓娜[2] 葛麟[2] 史超超 燕平[3] 于涛[1] TAN Wei;ZHANG Xiao-na;GE Lin;SHI Chao-chao;YAN Ping;YU Tao(Institute of Functional Materials,Central Iron&Steel Research Institute,Beijing 100081;Institute of Microstructure and Property of Advanced Materials,Beijing University of Technology,Beijing 100124;High Temperature Materials Institute,Central Iron&Steel Research Institute,Beijing 100081,China)

机构地区：[1]钢铁研究总院功能材料研究所,北京100081 [2]北京工业大学固体微结构与性能研究所,北京100124 [3]钢铁研究总院高温材料研究所,北京100081

出　　处：《电子显微学报》2021年第4期373-378,共6页Journal of Chinese Electron Microscopy Society

基　　金：国家重点研发项目(No.2017YFB0701503);国家自然科学基金资助项目(No.52073169,No.11874077).

摘　　要：研究镍基单晶高温合金在固溶处理和时效处理过程中显微结构的变化,对于更精细地制定热处理制度有重要的参考价值。本文利用电子探针(EPMA)、透射电镜(TEM)和扫描电镜(SEM),研究了Ni-Al-W三元镍基模型高温合金中元素枝晶偏析、相分配及显微结构的变化。研究结果表明:铸态时,W偏析在枝晶干,γ'相粗大且不规则;固溶处理后,γ'相细小且分布均匀;完全热处理后,γ'相尺寸增加,立方度变好,W择优分配在γ'相中。The research on the microstructure changes of nickel-based single crystal superalloy during solution and aging treatment has important reference value for a more precise formulation of heat treatment schedule.The electron probe micro-analyzer(EPMA),transmission electron microscope(TEM)and scanning electron microscope(SEM)are used to investigate the dendrite segregation,the phase distribution,and the evolution of microstructure during heat treatment in Ni-Al-W ternary nickel-based model single crystal superalloy.In the casting alloy,W segregates in the dendrites,andγ'precipitates are coarse and irregular.After solution treatment,γ'precipitates are fine,and their distributions are uniform.After full heat treatment,the size ofγ'phase increases,the shape ofγ'precipitates become more cubic,and W prefers to distribute toγ'phase.

关 键 词：镍基单晶高温合金 固溶处理 时效处理 显微结构 

分 类 号：TG146.15[一般工业技术—材料科学与工程] TG132.32[金属学及工艺—金属材料]