合成回路同步控制系统动模系统设计  

Design of Dynamic Simulation System for Synchronous Control System of Synthetic Test Circuit

作　　者：洪叶 赵勇 佟子昂 武建文[1] 周小猛 HONG Ye;ZHAO Yong;TONG Zi’ang;WU Jianwen;ZHOU Xiaomeng(School of Automation Science and Electrical Engineering,Beihang University,Beijing 100191,China;AVIC Guizhou Tianyi Electrical Co.,Ltd.(CAVIC Aviation Power System R&D Center),Guizhou Zunyi 563002,China;China National Quality Supervision and Testing Center for Smart Grid Transmission and Distribution Equipment,Guangdong Dongguan 523325,China)

机构地区：[1]北京航空航天大学自动化科学与电气工程学院,北京100191 [2]贵州天义电器有限责任公司(中航工业航空电力系统研发中心),贵州遵义563002 [3]国家电网输配电设备质量监督检验中心,广东东莞523325

出　　处：《高压电器》2021年第8期41-46,共6页High Voltage Apparatus

基　　金：国家自然科学基金(51677002,51937004);民用飞机专项科研技术研究项目(MJ⁃2017⁃S⁃46)。

摘　　要：为研发高压断路器合成回路试验同步控制系统,设计了一套能够在实验室环境下调试合成试验同步控制的模拟装置。首先,根据合成回路的试验机理设计了以下两部分:模拟三相短路状态下传感器采集的测试信号发生器以及模拟程控仪按设定时序给出的高压开锁信号触发器;同时,设计了参数调节器,使该测试系统可根据测试需要进行参数调试。通过与合成试验回路同步控制系统的最小系统进行联调,验证了其用于合成回路控制系统的研发设计的可行性。To develope the synchronous control system for high⁃voltage breaker,a simulation device is designed,which can be used in the laboratory to debug the Weil synthetic synchronous control system.First,according to the test mechanism of the Weil synthetic test,the device is required to provide the three⁃phase short⁃circuit current signal with exponential component to simulate the test signal collected by the sensor under short⁃circuit condition.Then,then device simulates the program controller to give the high⁃voltage unlock signal according to pre⁃setting time sequence.Meanwhile,a parameter regulater is designed so that the parameter of the test system can be adjusted to meet the testing requirments.Through the joint debugging with the minimum system of the synthetic test synchronous control system,the feasibility of its application in the research and development of the synthetic test control system is verified.

关 键 词：合成回路调试 高压断路器试验 威尔合成试验 模拟装置 

分 类 号：TM561[电气工程—电器]