Y波导波形斜度误差对光纤陀螺小角速率性能的影响  

Influence of Y-waveguide Waveform Slope Error on the Performance of Fiber Optic Gyroscope at Small Angular Rate

作　　者：范梓涵 于海成[1] 石海洋 FAN Zi-han;YU Hai-cheng;SHI Hai-yang(Beijing Aerospace Times Optical-electronic Technology Co.,Ltd,Beijing 100094;Beijing Institute of Aerospace Control Devices,Beijing 100039)

机构地区：[1]北京航天时代光电科技有限公司,北京100094 [2]北京航天控制仪器研究所,北京100039

出　　处：《导航与控制》2021年第2期61-67,共7页Navigation and Control

基　　金：装发部“十三五”预研项目(编号:41417010101,41417010103)。

摘　　要：Y波导器件的调制非线性引起波形斜度误差,进而影响光纤陀螺标度因数性能,特别是小角速率下的测量精度。重点分析了由Y波导调制非线性引起的波形斜度误差及其对小角速率下光纤陀螺性能影响的机理,并通过抑制Y波导器件高阶非线性电光效应减小波形斜度误差。实验验证结果表明,减小波形斜度误差能够有效抑制小角速率与大角速率标度因数差异,可将光纤陀螺死区由0.3(°)/h减小到0.1(°)/h以内,进而提升光纤陀螺小角速率性能。The modulation nonlinearity of Y-waveguide device causes the waveform slope error, which in turn affects the performance of fiber optic gyroscope(FOG) scale factor, especially the measurement accuracy at small angular rates. In this paper, Y-waveguide modulation nonlinearity causes the waveform slope error and effect on the performance of FOG at small angular rates are analyzed. Meanwhile, by suppressing the high-order nonlinear electro-optical effect of Y-waveguide, the waveform slope error is reduced. The experiment results show that the difference of scale factor between small angular rate and large angular rate could be effectively suppressed by reducing waveform slope error, which could reduce the dead zone of FOG from 0.3(°)/h to below 0.1(°)/h, thereby improving the performance of FOG at small angular rates.

关 键 词：光纤陀螺 波形斜度误差 高阶非线性 电光效应 

分 类 号：TP273.2[自动化与计算机技术—检测技术与自动化装置]