超高速角接触球轴承塑料保持架稳定性研究  

Research on Stability of Plastic Cage of Super High Speed Angular Contact Ball Bearing

作　　者：杨文飞 YANG Wen-fei(Huzhou Branch of Shanghai C&U Precision Machinery Co.,Ltd.,Huzhou 313000,China)

机构地区：[1]上海人本精密机械有限公司湖州分公司,湖州313000

出　　处：《内燃机与配件》2021年第17期90-91,共2页Internal Combustion Engine & Parts

摘　　要：本文采用文献法和仿真法,研究了超高速角接触球轴承塑料保持架稳定性。文章的研究思路为:首先,建立了球轴承多体动力学模型;其次,分析了保持架稳定性实例;最后,为了验证模型的可行性,进行了仿真测试。仿真结果表明,测试的超高速角接触球轴承塑料保持架稳定性良好,达到了预期的效果。In this paper,literature method and simulation method are used to study the stability of ultra-high-speed angular contact ball bearing plastic cage.The research ideas of the article are as follows:firstly,a multi-body dynamic model of the ball bearing is established;secondly,an example of cage stability is analyzed;finally,a simulation test is carried out in order to verify the feasibility of the model.The simulation results show that the tested ultra-high-speed angular contact ball bearing plastic cage has good stability and achieved the expected effect.

关 键 词：角接触球轴承 稳定性 仿真 建模 

分 类 号：TH133.33[机械工程—机械制造及自动化]