检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:冯帅克 郭正兴[1] 倪路瑶 李国建 宫长义 谢超 满建政 FENG Shuai-ke;GUO Zheng-xing;NI Lu-yao;LI Guo-jian;GONG Chang-yi;XIE Chao;MAN Jian-zheng(School of Civil Engineering,Southeast University,Nanjing 211189,China;Zhongyifeng Construction Group Co.Ltd,Suzhou 215131,China)
机构地区:[1]东南大学土木工程学院,江苏南京211189 [2]中亿丰建设集团股份有限公司,江苏苏州215131
出 处:《浙江大学学报(工学版)》2021年第8期1464-1472,共9页Journal of Zhejiang University:Engineering Science
基 金:国家“十三五”重点研发计划资助项目(2016YFC0701703).
摘 要:提出适用于装配式大跨度组合框架结构的钢管混凝土柱-混合梁节点.为了研究节点的抗震性能及受力机理,对2个足尺中柱节点试件进行低周往复加载试验.2个试件分别采用混合梁端型钢翼缘削弱式(RBS)节点以及梁端普通型钢节点.对2个节点的破坏形态、耗能能力、承载能力、延性以及混合梁的应变分布规律进行对比分析.试验结果表明,对梁端型钢翼缘的削弱处理可以有效促进试件在翼缘削弱区形成塑性铰,避免梁端焊缝的脆性破坏.相比型钢未经处理的节点,翼缘削弱节点展现出更好的延性和耗能能力;梁底附加钢筋屈服后的黏结滑移会影响节点的耗能能力,在锚固长度满足规范要求的前提下,应适当增加其配筋率,以防止过早出现附加钢筋屈服后的黏结滑移.A novel joint was proposed for connecting hybrid load beams and concrete-filled steel tube columns for long-span prefabricated structures.Cyclic reciprocating tests were conducted on two full-scale interior joint specimens to investigate the seismic performance and mechanical performance of the proposed joint.Two joint specimens were designed with different types of hybrid steel-concrete beams,i.e.,reduced beam section(RBS)and untreated H-steels were respectively used at the beam ends.The seismic performance of the joints was analyzed comprehensively based on the failure pattern,dissipated energy,bearing capacity,ductility and strain distribution along the precast hybrid beams.Test results showed that the specimen with RBS region can promote plastic hinge formation in the region,and avoid the brittle fracture of beam end welds.In contrast,the proposed joint with RBS region exhibited better ductility and energy dissipation capability than the joint with untreated steel beam.The energy dissipation of the specimens was affected significantly by the bond slip after the anchoring bars entered the yield stage.Therefore,When the anchorage length of the bars satisfies the design recommendations,a sufficient reinforcement ratio of the bars should be ensured to prevent the emergence of the anchorage bar bond slippage after the bars yielded.
关 键 词:混合梁 钢管混凝土柱 翼缘削弱式(RBS)节点 抗震性能 塑性铰
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.22.63.154