室内健康照明产品参数的实验室测试结果调查比对研究  

Comparative Study of Laboratory Test Results for Indoor Lighting Product Parameters

作　　者：郑怀文[1] 赵伟强[2] 李燕 杨华[1] ZHENG Huaiwen;ZHAO Weiqiang;LI Yan;YANG Hua(Institute of Semiconductors,Chinese Academy of Sciences,Research and Development Center for Solid State Lighting,Institute of Semiconductors,University of Chinese Academy of Sciences,Beijing Engineering Research Center for the 3rd Generation Semiconductor Materials and Application,Beijing 100083,China;National Institute of Metrology,China,Beijing 100029,China)

机构地区：[1]中国科学院半导体研究所中国科学院半导体照明研发中心中国科学院大学北京第三代半导体材料与应用工程技术研发中心半导体照明联合创新国家重点实验室,北京100083 [2]中国计量科学研究院,北京100029

出　　处：《照明工程学报》2021年第4期107-112,共6页China Illuminating Engineering Journal

基　　金：国家重点研发计划(批准号:2017YFB0403705)。

摘　　要：健康照明是当前照明研究的热点,相关产品的测试方法和评价标准也受到广泛关注。我们制备了不同色温的全光谱LED室内用球泡灯和筒灯灯具,分别在3家有资质的检测实验室进行相关色温和光通量的检测调查。调查结果表明,各个实验室给出的光通量测试结果一致性较好,在高色温区域和低色温区域,样品相关色温的检测结果均具有一致性。但在高色温区域,检测实验室的测量结果与灯具的标准值存在明显差异,该差异可能来源于校准仪器量值溯源、校准方法或规范、以及测试仪器本身的特征,如蓝光响应率或者杂散光偏差等因素造成。本研究对于未来进一步在技术和管理上改善健康照明相关的检测技术和检测标准具有指导意义。The full-spectrum LED indoor bulb and downlight fixtures with different color temperatures were prepared and tested in three qualified laboratories for the detection of the relevant color temperature and luminous flux.We found that the luminous flux test results given by each laboratory are relatively consistent,and the correlation temperature test results have strong consistency in the low color temperature region,while the correlation color temperature test results in the high color temperature region have consistency,but there is a certain difference with the standard value.This study has guiding significance for further technical and management improvement of health lighting-related test techniques and test standards in the future.

关 键 词：健康照明 检测 光通量 相关色温 

分 类 号：TM923[电气工程—电力电子与电力传动]