Performance of waterjet on cutting maize stalks: A preliminary investigation  

作　　者：Hongnan Hu Hongwen Li Qingjie Wang Jin He Caiyun Lu Yingbo Wang Chunlei Wang 

机构地区：[1]College of Engineering,China Agricultural University,Beijing 100083,China

出　　处：《International Journal of Agricultural and Biological Engineering》2019年第5期64-70,共7页国际农业与生物工程学报（英文）

基　　金：supported by the Special Fund for Agro-scientific Research in the Public Interest from the Ministry of Agriculture,China(Grant No.201503136).

摘　　要：Large amounts of crop stalks left in the field as a result of conservation agriculture cause blockage during no-till planting.To solve this issue,pure waterjet was used to cut off the maize stalks so that the rear furrow opener could pass through without blockage.In this investigation,an experimental study on depth of cut,which was the main performance indicator of pure waterjet on cutting maize stalks,was presented.A full factorial design with 200 tests was implemented with respect to three operation parameters,that is traverse speed,waterjet pressure,and standoff distance were considered as variables.An analysis of variance(ANOVA)was carried out in order to determine the statistical significance of individual operation parameters.Using multilinear stepwise regression analysis,a model to predict the cut of depth from the predicted pure waterjet operation to cut maize stalks was then developed.All three operation parameters significantly influenced the cutting performance.Moreover,the results indicated that depth of cut increased with the increase of waterjet pressure,the decrease of traverse speed,and decrease in standoff distance.Waterjet pressure provided major contribution to depth of cut,followed by traverse speed,then standoff distance,which was demonstrated by both ANOVA and regression analysis.The experimental results showed that when the standoff distance was closer than 10 mm and waterjet pressure was 280 MPa,all maize stalks specimen could be cutoff thoroughly.With the consideration of field operating conditions,waterjet pressure of 280 MPa or higher and 10 mm to 15 mm standoff distance were recommended for maize stalks cutting.This analysis provided a realistic approach for the optimization of the ultra-high pressure pure waterjet parameters in maize stalks cutting,which could be used to relieve the occurrence of straw blockage in no-till planting.

关 键 词：waterjet ultra-high pressure conservation tillage maize stalks CUTTING traverse speed standoff distance 

分 类 号：S51[农业科学—作物学]