100MW等级60Hz汽轮发电机转子槽型结构分析  

Analysis on the Rotor Slot Structure of 100MW Class 60Hz Turbine Generators

作　　者：李霖[1] 于鲁闽 LI Lin;YU Lumin(Shandong Qilu Electric Machinery Manufactory Co.,Ltd.)

机构地区：[1]山东齐鲁电机制造有限公司,250100

出　　处：《电机技术》2021年第4期1-4,8,共5页Electrical Machinery Technology

摘　　要：汽轮发电机转子结构设计和力学性能计算难度较大,特别是60 Hz机组,对齿部的结构强度要求更高。文章运用有限元方法建立了转子齿部、槽楔和转子线圈的三维模型。根据仿真计算,对转子结构的机械强度进行了校核,分析了转子主要破坏形式和危险位置。结果表明,现有转子的结构基本满足设计要求。It is very difficult to design the rotor structure of turbine generators as well as to calculate the mechanical properties of the rotor,especially for the 60 Hz generator sets,in which there is much higher requirement on the structural strength of the tooth structure.3 D model of the rotor teeth,rotor slot wedges and rotor coils are established by means of the FEM.Mechanical strength of rotor structure is verified and main failure forms&dangerous position on the rotor are analyzed based upon the simulative calculation.The results show that the existing rotor structure basically meets with the design requirement.

关 键 词：汽轮发电机 60Hz 转子齿部 有限元分析 

分 类 号：TM303[电气工程—电机]