工艺因素对T700碳纤维/环氧复合材料真空辅助树脂注射成型的影响  

Influence of process factor on VARI process of epoxy composite reinforced by T700 fabrics

作　　者：李丽英[1] 汪东 许孔力 尹先鹏 王国勇[1] Li Liying;Wang Dong;Xu Kongli;Yin Xianpeng;Wang Guoyong(Aerospace ResearchInstitute of Materials&Processing Technology,Beijing 100074)

机构地区：[1]航天特种材料及工艺技术研究所,北京100074

出　　处：《化工新型材料》2021年第8期74-78,共5页New Chemical Materials

基　　金：国防科技创新特区163计划(17-163-13-ZT-009-032-001)。

摘　　要：研究了真空辅助树脂注射(VARI)工艺中定型剂用量、预压实压力、预压实时间及注胶温度对注胶工艺、材料内部质量及力学性能的影响,以确定最优的工艺参数。结果表明:综合考虑充模时间,耐温性能及综合力学性能,定型剂用量20g/m^(2)时最优;预压实压力-0.92bar以上,预压实时间2h左右,材料内部质量及性能最优;结合树脂工艺性、充模时间及复合材料内部质量,注胶温度60℃较合适。采用优化后的工艺参数制备厚度不大于8mm的复合材料,其内部质量均匀可控。In order to determine the optimum process parameters of vacuum assisted resin infusion(VARI)processing,the influences of tackifier,preloading pressure,preloading time and filling time on VARI resin injection,internal quality and mechanical performance of composites were taken into account.The results showed that:considering filling time,temperature resistance performance and mechanical properties of composites,the best addition level of tackifier should kept at 20 g/m^(2).Internal quality and mechanical performance of the composites reached the best when preloading pressure was kept above-0.92 bar and preloading time kept at 2 h.Considering manufacturability of epoxy resin,filling time and internal quality of the composites,injection temperature should kept at 60℃.Internal quality of the composites within 8 mm thickness were controllable when prepared with the optimized parameters.

关 键 词：真空辅助树脂注射工艺 工艺因素 复合材料 

分 类 号：TB332[一般工业技术—材料科学与工程]