气缸套内表面激光造型珩磨加工  

Laser Modeling and Honing of Inner Surface of Cylinder Liner

作　　者：田晓光 TIAN Xiao-guang(Huanghe Jiaotong University,Jiaozuo 454950,China)

机构地区：[1]黄河交通学院,焦作454950

出　　处：《内燃机与配件》2021年第18期49-50,共2页Internal Combustion Engine & Parts

基　　金：河南省科技攻关项目:节能低排放长寿命气缸套制造关键技术与试验研究(项目编号:212102210340)。

摘　　要：随着现代化技术以及信息化手段的飞速发展,社会已经全面进入到了科技时代当中,而气缸套作为发动机当中至关重要的组成部分,其对于发动机的经济性、排放性以及机动性方面有着重要影响,但由于气缸套所处的工作环境过于恶劣,这就会在潜移默化之间对整体发动机的可靠性产生不良影响,所以,这就需要在气缸套内表面采用激光造型珩磨工艺。因此,文章首先对气缸套的表面结构分析加以明确;其次,对激光造型设计的基本原则展开深入分析;在此基础上,提出气缸套内表面的激光造型珩磨加工。With the rapid development of modern technology and information technology,society has fully entered the era of science and technology.As a vital part of the engine,the cylinder liner has an impact on the economy,emissions and mobility of the engine.Important influence,but because the working environment of the cylinder liner is too harsh,it will have a negative impact on the reliability of the overall engine in a subtle way.Therefore,it is necessary to adopt a laser modeling honing process on the inner surface of the cylinder liner.Therefore,the article first clarifies the surface structure analysis of the cylinder liner;secondly,it conducts an in-depth analysis of the basic principles of laser modeling design;on this basis,the laser modeling honing processing of the inner surface of the cylinder liner is proposed.

关 键 词：气缸套内表面 激光造型 珩磨加工 

分 类 号：S219.031[农业科学—农业机械化工程]