检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:高伟夫 马蕙[1] GAO Weifu;MA Hui(School of Architecture,Tianjin University,Tianjin 300072,China)
机构地区:[1]天津大学建筑学院,天津300072
出 处:《应用声学》2021年第5期698-704,共7页Journal of Applied Acoustics
基 金:国家自然科学基金项目(51678401)。
摘 要:为提升钢结构装配式住宅隔声性能,通过有限元法数值分析,比较了不同位置墙板的连接方式对房间隔声性能的影响。结果表明:侧墙墙板柔性连接处理对侧向传声的抑制作用显著,当侧墙墙板采用柔性连接后,房间的隔声量在低频段平均可以提升3 dB左右;公共隔墙墙板的柔性连接对房间低频段隔声量提升不明显,甚至在160 Hz、400 Hz、500 Hz等频率下隔声量有所降低。最后,基于模拟分析结果对装配式墙体连接方式提出了改进策略。In order to improve the sound insulation performance of steel-structured prefabricated dwellings,a finite element method numerical analysis was used under different conditions.Simulation results showed that the junction modes of wall panel had influence on the sound insulation performance of two adjacent rooms:1)The flexible junction of side wall panel had obvious effects on inhibiting sound flanking transmission,and the sound insulation capacity was improved by nearly 3 dB in low frequency;2)The flexible junction of the partition wall panel had no obvious effects.The sound insulation was not significantly improved in low frequency,and it indeed decreased at 160 Hz,400 Hz,500 Hz.Finally,based on the simulation results,the improving strategies were proposed for the wall panel junction construction of steel-structured prefabricated dwellings.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.30