高含水油田断层边部挖潜技术  

Potential tapping technique at the edge of fault in high water cut oilfield

作　　者：李文龙[1,2] 白军辉[2] 冯晗[2] 丛岩 郭子正 王大成 LI Wenlong;BAI Junhui;FENG Han;CONG Yan;GUO Zizheng;WANG Dacheng(School of Geosciences,Northeast Petroleum University,Daqing 163318,China;No.3 Oil Production Plant,Daqing Oilfield Company Ltd.,PetroChina,Daqing 163113,China;No.1 Oil Production Plant,Daqing Oilfield Company Ltd.,PetroChina,Daqing 163451,China)

机构地区：[1]东北石油大学地球科学学院,黑龙江大庆163318 [2]中国石油大庆油田有限责任公司第三采油厂,黑龙江大庆163113 [3]中国石油大庆油田有限责任公司第一采油厂,黑龙江大庆163451

出　　处：《断块油气田》2021年第5期677-682,共6页Fault-Block Oil & Gas Field

基　　金：国家科技重大专项“大庆长垣特高含水油田提高采收率示范工程”(2016ZX05054)。

摘　　要：高含水油田断层边部开发难在断层认识、潜力识别、精准钻井、驱动能量保障及套损防控等方面,方案设计必须体现整体性,否则开发后期的剩余油“甜点”将无法得到有效开发。文中以SBFD区为例,通过特殊潜力筛选和制定挖潜界限优选断层附近开发潜力区,通过断层结构精细刻画和内部构型认识实现井轨迹贴近断面,通过优化高效井井型和方位确保高效井的轨迹设计最优,通过优化注采井网、射孔方式、油水井协同调整减缓产量递减速度,通过分析断层附近套损成因和承压界限规避断层区套损风险,总结形成了一套较为完整的断层边部挖潜技术。投产后,SBFD区高效井产量达到周围井的7倍以上,实现了断层区的精准部署和科学开发,对其他同类区块后期挖潜具有一定的借鉴意义。The development of fault edge in high water cut oilfield is difficult in five aspects:fault recognition,potential identification,precision drilling,driving energy protection and casing damage prevention and control.The design must reflect the integrity.Otherwise,the"sweet spot"of remaining oil in the later stage of development will not be effectively extracted.Taking SBFD area as an example,this paper optimizes the potential near the fault through special potential screening and formulation of potential tapping limit,realizes the well trajectory close to the fault section through accurate fault structure characterization and internal configuration understanding,ensures the optimal design trajectory of high-efficiency well by optimizing the well type and orientation of high-efficiency well,and slows down the rate of production decline by optimizing the injection-production well pattern,perforating mode,injection and production well coordination.Through the analysis of the causes of casing damage near the fault and the pressure limit to avoid the risk of casing damage in the fault area,a relatively complete set of high-efficiency well development technology at the fault edge is summarized and formed.The production of high-efficiency wells in SBFD area is more than 7 times that of the surrounding wells,realizes the accurate deployment of the fault zone and the scientific development,and has a certain reference meaning for potential tapping of other similar blocks.

关 键 词：断层边部 剩余油 轨迹设计 套损防控 高含水油田 

分 类 号：TE321[石油与天然气工程—油气田开发工程] P631[天文地球—地质矿产勘探]