检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:宋二祥[1,2] 付浩 林世杰 程晓辉[1,2] Song Erxiang;Fu Hao;Lin Shijie;Cheng Xiaohui(School of Civil Engineering,Tsinghua University,Beijing 100084,China;Key Laboratory of Civil Engineering Safety and Durability of the Ministry of Education,Tsinghua University,Beijing 100084,China)
机构地区:[1]清华大学土木水利学院,北京100084 [2]清华大学土木工程安全与耐久教育部重点实验室,北京100084
出 处:《土木工程学报》2021年第9期88-95,共8页China Civil Engineering Journal
基 金:国家自然科学基金(51778339)。
摘 要:针对饱和黏性土在不排水条件下的总应力分析,首先进一步深入阐释泰沙基有效应力原理,指出应注意区分静水压和超静水压,区分含有总水压的平衡总应力和仅含有超静水压的本构总应力。采用总应力法进行饱和土不排水分析时,这"总应力"只能是本构总应力。进而指出固结不排水强度指标一般不宜直接用于不排水强度计算,直接计算所带来误差的情况与实际总应力路径的斜率有关。建议此时采用饱和土原状土样在实际有效自重应力下预固结后不排水剪切试验测得的不固结不排水强度cu,并给出从固结不排水强度指标计算不固结不排水强度cu的公式。最后就地基承载力、朗肯土压力和基坑稳定分析三类问题给出算例,分别采用不固结不排水强度和直接采用固结不排水强度指标进行计算,通过对比展示后者的误差情况并对其具体原因进行分析。With regard to the total stress method for undrained analysis of saturated clay,the Terzaghi’s principle of effective stress is interpreted firstly in depth,with emphasis on the distinction between steady pore pressure and excess pore pressure and the distinction between equilibrium total stress containing total pore pressure and constitutive total stress containing only excess pore pressure. When applying the total stress method to undrained analysis of saturated clay,the “total stress”must be the constitutive stress. Furthermore,it is clearly pointed out that the consolidated undrained strength parameters usually should not be used directly in the strength calculation of undrained soil,and the error induced thereby is related with the slope of the total stress path. It is proposed that the unconsolidated undrained strength cu shall be employed,and calculation formulas for determining the strength parameter cu from the consolidated undrained strength parameters are provided. Three typical types of geotechnical problems, namely ground bearing capacity,Rankine’s earth pressure and excavation stability,are calculated by using the two types of strength parameters,and the differences in the results are demonstrated and discussed.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222