气举反循环工艺施工过程中发生糊钻的钻头改进研究  

Study on the Improvement of Bailed Drill Bits During the Construction of Gas Lift Reverse Circulation

作　　者：沈海姣 王恩 Shen Haijiao;Wang En(Zhejiang Yitong Special Basic Engineering Co.,Ltd.,Ningbo Zhejiang 315800,China)

机构地区：[1]浙江易通特种基础工程股份有限公司,浙江宁波315800

出　　处：《城市建筑》2021年第24期157-159,共3页Urbanism and Architecture

摘　　要：在大直径钻孔灌注桩施工过程中,软可塑、干强度高、韧性高的粉质黏土层较为常见,用三翼刮刀钻头切削该类土层时常出现"糊钻"现象。"糊钻"会严重影响施工进度。本文阐述的某桩基工程案例,通过改进三翼刮刀钻头、泥浆性能及钻进参数,不仅解决了糊钻问题,同时还提高了钻进效率,提升了整个工程的施工进度,并且产生了良好的经济效益。In the construction of large-diameter bored piles,soft plastic,dry-strength,and high-toughness silty clay layers are common.The phenomenon of“pasting drilling”often occurs when cutting this type of formation with a three-wing scraper bit.“Pasting drilling”seriously affects the construction progress.This paper describes a case of a pile foundation project.By improving the three-wing scraper bit,mud performance and drilling parameters,the pasting drilling problem is solved,while the drilling efficiency is improved,and the entire project construction is improved,and good economic benefits are obtained.

关 键 词：气举反循环工艺 糊钻 钻头改进 工效提升 

分 类 号：TU984.12[建筑科学—城市规划与设计]