Analysis of flow-field in a dual mode ramjet combustor with boundary layer bleed in isolator  

作　　者：Nishanth Thillai Amit Thakur Srikrishnateja K. Dharani J. 

机构地区：[1]Department of Mechanical Engineering,PES University,Bangalore,India

出　　处：《Propulsion and Power Research》2021年第1期37-47,共11页推进与动力（英文）

摘　　要：A two-dimensional Reynolds averaged Navier Stokes(RANS)simulation of a dual mode ramjet(DMRJ)combustor is performed,modeling the University of Michigan dual-mode combustor experimental setup operating in reacting mode with different equivalence ratios(4).The simulations are carried out using a k-u SST turbulence model and a steady diffusion flamelet model for non-premixed combustion.Air enters the isolator at Mach 2.2,stagnation pressure and temperature of 549.2 kPa and 1400 K respectively.Hydrogen is injected transverse to the flow direction and upstream of the cavity flame holder to simulate ramjet(4 Z 0.29)and scramjet(4 Z 0.19)modes of operation.Wall static pressure plots are used to validate numerical results against experimental data.Analysis of flow separation in ramjet mode due to the presence of a shock train in the isolator is carried out by means of numerical Schlieren images overlapped with contours of negative axial velocity,showing the effects of shock wave boundary layer interaction(SWBLI).Active control through wall normal boundary layer bleed in the separated flow region is implemented,which weakens the shock train and moves it downstream closer to the cavity.Bleed results in an improved stagnation pressure recovery in ramjet mode,with a marginal increase in combustion efficiency.

关 键 词：Dual mode ramjet Scramjet combustor Shock wave boundary layer interaction Boundary-layer bleed Flamelet combustion model 

分 类 号：O35[理学—流体力学]