方钢管柱-H型钢梁全螺栓连接节点抗震性能分析  

Seismic Performance Analysis of Square Steel Tube Column-H Steel Beam Full Bolt Connection Joint

作　　者：倪茜[1] 高金瑞 吴丹丹 NI Qian;GAO Jin-rui;WU Dan-dan(School of Architecture and Civil Engineering, Xi'an University of Science and Technology, Xi'an 710054, China;Yunnan Architectural Engineering Design Institute Co., Ltd., Yunnan 650000, China)

机构地区：[1]西安科技大学建筑与土木工程学院,西安710054 [2]云南省建筑工程设计院有限公司,云南650000

出　　处：《科学技术与工程》2021年第27期11688-11695,共8页Science Technology and Engineering

基　　金：国家自然科学基金(41502298)。

摘　　要：为针对钢框架梁柱节点在焊接时易发生脆性破坏的问题,在原有的方钢管柱-H型钢梁节点(T-3)下,构建一种通过槽钢连接件采用全螺栓连接方钢管柱-H型钢梁的基准模型(BASE试件)。运用ABAQUS模拟分析,变动轴压比、方钢管柱壁厚、螺栓预紧力,对其抗震性能展开分析。结果表明:BASE模型节点最终以环板螺栓孔撕裂破坏而结束工作,避免了栓焊易出现的脆性破坏;方钢管柱壁厚的增加使节点域强度增强,从而提高节点的延性,耗能能力也随之增强;节点延性随轴压比的增大先增大后减小,变化范围在4.618~2.567;螺栓预紧力从77.5 kN增加到186 kN,刚度提升幅值约61.4%,节点的承载能力也有很大的提升。In view of the brittle failure of steel frame beam-column joints during welding.A column-H-beam base model(BASE specimen)of full-bolted square steel tube was constructed through channel steel connectors under the original square steel tube column-H-shaped steel beam joint(T-3).By using ABAQUS simulation analysis,variable axial compression ratio,square steel tube column wall thickness,bolt pre-tightening force,the seismic performance were analyzed.The results showed that,the BASE model node ends up with the tearing failure of the bolt hole of the ring plate,which avoids the brittle failure of bolt welding.Because of the wall thickness of the square steel tube colum has enlarged,strength of node domain has a great promotion,thereby increasing the ductility of the joint and ability to consume energy;The ductility of the joint first increases and then decreases with the increase of the axial compression ratio,and the variation range is 4.618~2.567.The pre-tightening force of bolts increased from 77.5 kN to 186 kN,the stiffness increased by about 61.4%,and the bearing capacity of joints was also greatly improved.

关 键 词：梁柱节点 全螺栓连接 抗震性能 数值模拟 

分 类 号：TU391[建筑科学—结构工程]