Cu-0.1%Ag合金的晶粒显示和分析  

Grain Structure Analysis of Cu-0.1% Ag Alloy

作　　者：闫洪 曹瑞珂 YAN Hong;CAO Rui-ke(Material Research Institute of Kunming Metallurgical Research Institute Co.,Ltd,Kunming 650031,Yunnan,China)

机构地区：[1]昆明冶金研究院有限公司,云南昆明650031

出　　处：《铜业工程》2021年第4期11-13,共3页Copper Engineering

摘　　要：在铜银合金晶粒组织的检测方法中,浸蚀剂的选取和晶粒的分析是关键。试验结果表明,由2g硝酸铁和50mL无水乙醇的混合液组成的浸蚀剂,适用于Cu-0.1%Ag合金晶粒的显示,金相组织的晶界清晰和晶粒完整。经过显微镜观察,合金的显微组织主要由单相Cu固溶体组成,并出现了等轴晶、孪晶、柱状晶和纤维组织,这与合金的性能密切相关。The selection of etchant and the analysis of grain are the key to test method of grain of Cu Ag alloy.The results show that etchant composed of a mixture of 2g ferric nitrate and 50mL anhydrous ethanol is suitable for displaying the grains of Cu-0.1%Ag alloy.The grain boundary of metallographic structure is clear and the grains are complete.The microstructure of the alloy is mainly composed of single-phase Cu solid solution,and equiaxed grains,crystal twin,columnar grains and fibrous tissue appear,which is closely related to the properties of the alloy.

关 键 词：Cu-0.1%Ag合金 晶粒 金相检测 浸蚀剂 性能 

分 类 号：TG146[一般工业技术—材料科学与工程]