表面着色的显微测量方法研究  

Research on the microscopic measurement method of surface coloring

作　　者：沈涛 李健[1,2] 陈实 熊鸣 金卫凤[3] Shen Tao;Li Jian;Chen Shi;Xiong Ming;Jin Weifeng(School of Materials Science and Engineering,Jiangsu University,Zhenjiang 212013,China;Research Institute of Intelligent and Flexible Mechatronics,Jiangsu University,Zhenjiang 212013,China;School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013,China)

机构地区：[1]江苏大学材料科学与工程学院,江苏镇江212013 [2]江苏大学智能柔性机械电子研究院,江苏镇江212013 [3]江苏大学机械工程学院,江苏镇江212013

出　　处：《江苏科技信息》2021年第28期43-48,共6页Jiangsu Science and Technology Information

基　　金：国家自然科学基金,项目编号:51775248;江苏大学科研立项项目,项目编号:Y18A013。

摘　　要：文章提出用于研究表面微观色彩构成的表面着色光学显微测量方法。为验证这种测量方法的可行性,利用Photoshop软件对已有文献中的显微图片进行处理,分析显微图片的Lab值分布,考察了分析的Lab值与文献中通过分光光度计测量结果之间的相关性。结果表明,显微图片的Lab值具有较大的分布范围,从显微图片分析出的Lab值平均值与通过分光光度计测得的数据具有相关性,基于显微测量分析方法可实现显微图片的选区分析。采用光学显微测量方法有望实现表面微观色彩构成的测量分析。This paper proposes a microscopic measurement method of surface coloring for the surface microscopic color composition.To verify the feasibility of this method,the Lab value of micrographs from references was analyzed through Photoshop software and compared with the experimental results measured by spectrophotometer to investigate their correlation.The results show that the Lab value of the micrograph has a large distribution range.And the average value of the Lab value analyzed from the micrograph is correlated with the data measured by the spectrophotometer.The selected area analysis of the micrograph can be realized based on the microscopic measurement method.Through microscopic measurement method of surface coloring,it is expected to realize the measurement and analysis of surface color composition.

关 键 词：表面着色 光学显微镜 色彩构成 Lab值 

分 类 号：TH74[机械工程—光学工程]