可调螺距螺旋桨螺距变化对轴系振动的影响  

Influence of the pitch change of adjustable pitch propeller on shafting vibration

作　　者：张梦 朱汉华[1] 李昭辉 门皓 朱志鹏 ZHANG Meng;ZHU Han-hua;LI Zhao-hui;MEN Hao;ZHU Zhi-peng(School of Energy and Power Engineering,Wuhan University of Technology,Wuhan 430063,China)

机构地区：[1]武汉理工大学能源与动力工程学院,湖北武汉430063

出　　处：《舰船科学技术》2021年第17期54-59,共6页Ship Science and Technology

基　　金：国家自然科学基金资助项目(51839005)。

摘　　要：为了研究船舶可调螺距螺旋桨螺距变化对轴系结构振动的影响,本文以某集装箱船的推进轴系和螺旋桨为例,采用有限元分析方法对其进行流固耦合仿真,分析船舶尾轴的应力与变形、振动以及模态变化。研究结果表明,螺旋桨螺距改变螺旋桨周围水域的流线运动状态,使得其受力变形更加不均匀。随着螺旋桨螺距的逐渐增大,轴系固有频率减小;船舶尾轴在一些特定频率附近会产生较大的共振幅值。为提高尾轴使用寿命,尾轴激励应避免这些频率。在一定范围内,尾轴在22°左右的螺距角下更容易产生较大的振动,可通过合理调节螺距角,以避免出现共振现象。In order to analyze the influence of propeller pitch variation on shaft structure vibration,this paper takes a container ship's propulsion shafting as an example,carries out fluid structure coupling simulation with finite element analysis method,and analyzes the stress,deformation,vibration and modal changes of the ship's stern shaft.The results show that the propeller pitch changes the streamline motion state around the propeller,which makes the stress deformation more uneven.With the gradual increase of the propeller pitch,the natural frequency of the shafting decreases;the ship stern shaft will produce large resonance amplitude near some specific frequencies.In order to improve the service life of the stern shaft,these frequencies should be avoided.In a certain range,the stern shaft is more likely to produce larger vibration when the pitch angle is about 22°and the resonance phenomenon can be avoided by adjusting the pitch angle reasonably.

关 键 词：可调螺旋桨 轴系振动 流固耦合 模态分析 谐响应分析 

分 类 号：U664.21[交通运输工程—船舶及航道工程]