行波管内真空度测量研究  

Vacuum Measurement in Travelling-Wave Tubes

作　　者：翟建国[1] 周碎明[1] 魏义学[1] 崔建玲[1] 周军[1] 宋芳芳 王铁羊 ZHAI Jian-guo;ZHOU Sui-ming;WEI Yi-xue;CUI Jian-ling;ZHOU Jun;SONG Fang-fang;WANG Tie-yang(Beijing Vacuum Electronics Research Institute,Beijing 100015,China;China Electronic Product Reliability and Environmental Testing Research Institute,Guangzhou 510610,China)

机构地区：[1]北京真空电子技术研究所,北京100015 [2]中国电子产品可靠性与环境试验研究所,广东广州510610

出　　处：《真空电子技术》2021年第5期80-83,共4页Vacuum Electronics

摘　　要：行波管内真空度对其性能、可靠性具有重要影响,通过对几种测量真空度方法的比较,确定采用热阴极电离计法。通过分析、实验确定了加电参数,针对离子流波动大的问题,采用电子轰击除气降低放气的影响,采用电源屏蔽措施减少信号干扰等,最终获得了样管真空度同离子流的对应关系。对同型产品检测离子流后,对照离子流同真空度的对应关系可评价真空度。The vacuum degree in travelling-wave tube(TWT)has an important influence on its performance and reliability.Through the comparison of several vacuum degree measurement methods,the thermal cathode ion gauge method is adopted in research.The electrode parameters are determined through analysis and experiments.In view of the large ion current fluctuation,electron bombardment degassing is used to reduce the influence of outgassing,and power shielding is used to reduce signal interference.Finally,the corresponding relationship between tube vacuum and ion current is obtained.By detecting the ion current of the same type products,the vacuum degree of them can be evaluated by the obtained corresponding relationship.

关 键 词：行波管 真空度 离子流 

分 类 号：TN124[电子电信—物理电子学]