预防接装纸回卷的吹气装置设计  

Design of air blowing device for preventing tipping paper from winding back

作　　者：潘恒乐 孟庆华[2] PAN Hengle;MENG Qinghua(Changde Tobacco Machinery Co.,Ltd.,Changde 415000,Hunan,China;Qingzhou Cigarette Factory,China Tobacco Shandong Industrial Co.,Ltd.,Qingzhou 262599,Shandong,China)

机构地区：[1]常德烟草机械有限责任公司,湖南省415000 [2]山东中烟工业有限责任公司青州卷烟厂,山东省262599

出　　处：《烟草科技》2021年第10期92-95,112,共5页Tobacco Science & Technology

基　　金：国家烟草专卖局细支卷烟升级创新重大专项项目“10000支/分钟细支烟高速卷接机组研制项目”[110201801014(XZ-02)];山东中烟工业有限责任公司科技项目“短支卷烟加工过程关键技术研究”(201901003)。

摘　　要：为解决ZJ116B型卷接机组在启动和停机阶段出现接装纸回卷到胶辊的问题,设计了一种吹气装置。采用IPC系统控制气源中压缩空气的通断,使设置在接装纸上下两侧的吹气管在启停阶段同时对接装纸进行吹气,以保证接装纸处于张紧状态,避免接装纸落入胶辊。以青岛卷烟厂生产的"泰山(白将军)"牌号细支卷烟为对象,对改进前后ZJ116B机组进行测试,结果表明:改进后机组接装纸卷入胶辊次数由7.4次/班次降低到0,人工清洗胶辊时间减少74 min/班次。该方法可在ZJ17D、ZJ112A等卷接机组上推广应用。In order to prevent tipping paper from winding on gluing roller at machine start/stop stage,an air blowing device was designed for ZJ116 B cigarette maker.An IPC system was used to control the on/off of air supply,the air jets installed on the upper and lower sides of tipping paper blew the tipping paper at both sides during the start/stop stage to keep the tipping paper at a tensioned state and prevent it from falling on the gluing roller.The modified ZJ116 B cigarette maker was tested on slim cigarettes of brand"Mount Tai(White General)"in Qingdao Cigarette Factory.The results showed that the frequency of tipping paper winding on gluing roller reduced from 7.4 times/shift to 0,and the time for artificial gluing roller cleaning decreased by 74 min/shift.This method could be popularized and applied on ZJ17 D,ZJ112 A and other cigarette makers.

关 键 词：ZJ116B型卷接机组 接装纸 胶辊 回卷 吹气装置 

分 类 号：TS433[农业科学—烟草工业]