检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张冠杰 吴孔友[1] 范彩伟 刘敬寿 邓广君 刘芋杰 ZHANG Guanjie;WU Kongyou;FAN Caiwei;LIU Jingshou;DENG Guangjun;LIU Yujie(School of Earth Science and technology,China University of Petroleum(East China),Qingdao 266555,China;Zhanjiang Branch Company of CNOOC Ltd.,Zhanjiang 524057,China)
机构地区:[1]中国石油大学(华东)地球科学与技术学院,青岛266555 [2]中海石油(中国)有限公司湛江分公司,湛江524057
出 处:《高校地质学报》2021年第5期616-624,共9页Geological Journal of China Universities
基 金:国家科技重大专项(2017ZX05001003-004);中国科学院先导科技A类专项(XDA14010301);中国博士后面上基金(2019M662464)联合资助。
摘 要:莺琼盆地中新统是油气勘探开发的重点层系,但海上区块深层储层取心极少,岩石力学参数研究较为薄弱。针对这种现状,文章基于声波全波列测井曲线,计算岩石动态力学参数;利用全岩矿物、物性分析以及压汞实验资料,分析岩石力学参数的影响因素。结果表明:研究区中新统储层杨氏模量介于20~50 GPa之间,泊松比介于0.1~0.35之间,内摩擦角介于20°~35°之间,抗张强度介于5~30 MPa之间。横向上,同一层位各岩石力学参数之间具有非均一性;垂向上,岩石力学参数与埋深呈弱正相关性。影响因素分析表明,岩石孔隙度、粘土矿物含量、脆性矿物含量以及孔隙半径影响岩石力学参数大小。研究成果一方面为该区地应力场模拟、储层裂缝评价以及目的层压裂优化设计提供了可靠的基础数据;另一方面,为衔接深部储层地质参数与地质力学参数评价提供了理论依据。As the key target for oil and gas exploration and development in the Yingqiong Basin,the Miocene reservoir rocks are deeply buried in offshore blocks and have rarely been cored.Consequently,insufficient research has been implemented on their mechanical parameters.In this study,full-waveform acoustic logging curves are used to calculate the rock mechanical parameters of Miocene reservoir rocks.Specifically,whole-rock mineral analysis,physical property analysis,and mercury intrusion experiments are conducted to identify the key factors that influence the rock mechanical parameters.The Miocene reservoir rocks feature a Young’s modulus range of 20-50 GPa,a Poisson’s ratio range of 0.1-0.35,an internal friction angle range of 20°-35°,and a tensile strength range of 5-30 MPa.Laterally,heterogeneity of mechanical parameters is seen in the same layer.Vertically,these mechanical parameters present a weak positive correlation with the burial depth.Four factors are demonstrated to be crucial for rock mechanical parameters,namely rock porosity,clay mineral content,brittle mineral content,and pore radius.The results of this study provide reliable basic data for the simulation of insitu stress field,evaluation of reservoir fractures,and optimization of the target fracturing scheme.Moreover,the results of this study provide a theoretical basis for evaluation of geological and rock mechanical parameters of deeply buried reservoirs.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7