Geoid undulation modeling through the Cokriging methode——A case study of Guayaquil, Ecuador  

作　　者：Iván Palacios Orejuela César Leiva González Xavier Buenano Guerra Elena Chicaiza Mora Theofilos Toulkeridis 

机构地区：[1]Universidad de las Fuerzas Armadas ESPE,Sangolquí,Ecuador [2]Universidad Politécnica de Madrid,Madrid,Spain

出　　处：《Geodesy and Geodynamics》2021年第5期356-367,共12页大地测量与地球动力学（英文版）

摘　　要：The determination of vertical component plays a fundamental role in the initial phase of engineering applications. However, its acquisition is technically and economically demanding, mainly due to the precise heights relative to a reference surface, such as the mean sea level. The Cokriging technique is a necessary input for the calculation of the vertical component of the geodetic control points measured by GNSS, and it requires less auxiliary data and uses complementary available variables for the calculation.Therefore, the main goal is to use Cokriging to establish a geoid undulation prediction model for the rural area of the canton of Guayaquil, Ecuador. Ordinary, Residual and Universal Cokriging and Kriging techniques were used to compare their results and select the best for achieving accuracy. The validation of the application techniques yielded that Universal Cokriging was the most accurate with an RMSE of 8 cm and RSR of 2 cm, obtained just with 66 samples(20% of the dataset). Furthermore, considering the comparison with other regional geoid undulation models, the proposed model increased the accuracy of the results by a ratio of 9.68 and 6.96 in relation to EGM96 and EGM08, respectively.

关 键 词：Universal Cokriging KRIGING Mean sea level GNSS 

分 类 号：P228.4[天文地球—大地测量学与测量工程] P223.0[天文地球—测绘科学与技术]