检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:谢燕媚 仝保田 任兴杰 唐帅 段权[1] XIE Yan-mei;TONG Bao-tian;REN Xing-jie;TANG Shuai;DUAN Quan(School of Chemical Engineering and Technology,Xi’an Jiaotong University,Xi’an 710000,China;Shandong Chambroad Petrochemicals Co.Ltd.,Binzhou 256500,China)
机构地区:[1]西安交通大学化学工程与技术学院,陕西西安710000 [2]山东京博石油化工有限公司,山东滨州256500
出 处:《石油化工设备》2021年第6期69-72,共4页Petro-Chemical Equipment
摘 要:山东某石化企业的蜡油加氢装置加热炉运行过程中,存在严重的管道振动现象并伴随有间歇性异响。采用振动信号测试系统结合有限元仿真模拟的方式,对加热炉炉管进行振动分析。利用ANSYS Workbench有限元软件计算管道模型的前150阶固有频率,在对比激发频率与固有频率后,发现管道系统激发频率和固有频率相近。通过进一步的谐响应分析,判定炉内间歇性异响来源于辐射炉弯管与吊架的碰撞与摩擦,压缩机的往复脉冲激励频率所致的强迫振动是导致加热炉产生异响的主要原因。During the operation of the heating furnace of the wax oil hydrogenation unit of a petrochemical plant in Shandong Province,there was severe pipeline vibration accompanied by intermittent abnormal noise.The vibration signal testing system combined with finite element simulation was used to analyze the vibration of the heating furnace pipeline.The first 150 order natural frequencies of the pipeline model were calculated by using ANSYS Workbench finite element software.After comparing the excitation frequency and the natural frequency,it is found that the excitation frequency and the natural frequency of the pipeline system are close.Through further harmonic response analysis,it is determined that the intermittent abnormal noise in the furnace comes from the collision and friction between the radiant furnace elbow and the hanger.The forced vibration caused by the reciprocating pulse excitation frequency of the compressor is the main reason for the abnormal noise of the heating furnace.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.170