基于双曲正切函数的光伏/温差自适应MPPT控制策略研究  

Self-adaptive photovoltaic/temperature difference MPPT control strategy based on hyperbolic tangent function

作　　者：王立舒[1] 白龙 房俊龙[1] 李欣然[1] 李闯 董宇擎 Wang Lishu;Bai Long;Fang Junlong;Li Xinran;Li Chuang;Dong Yuqing(Institute of Electrical and Information,Northeast Agricultural University,Harbin 150030,China;School of Physics and Electronic Engineering,Mudanjiang Normal University,Mudanjiang 157011,China)

机构地区：[1]东北农业大学电气与信息学院,哈尔滨150030 [2]牡丹江师范学院物理与电子工程学院,牡丹江157011

出　　处：《农业工程学报》2021年第16期184-191,共8页Transactions of the Chinese Society of Agricultural Engineering

基　　金：黑龙江省教育厅科技课题(12521038);黑龙江省教育厅基本科研业务费支持项目(1353MSYYB015)。

摘　　要：为了提高光伏/温差联合发电系统的效率,需要进行最大功率点跟踪(Maximum Power Point Tracking,MPPT)控制。针对传统电导增量法步长固定不变导致跟踪速度慢和稳态误差大的缺点,该研究提出一种恒定电压法和双曲正切型自适应变步长算法结合的MPPT控制策略。该策略利用双曲正切函数单调递增、变化速度快的特点,使步长可以根据光强等外界环境条件的变化,自适应地快速调整,同时利用恒定电压法加快追踪的响应速度。Matlab/Simulink软件仿真和硬件试验表明,该研究所提方法在光照强度剧烈变化时,系统能够在15 ms内快速跟踪到最大功率点,同时稳态误差低于0.3%,实现了MPPT控制在跟踪速度和稳态精度方面的同步优化。An effective supply mode,solar power is gradually gaining much attention for the environmental friendliness and convenience.Among them,a photovoltaic/thermal co-generation technology is usually utilized to improve the power generation efficiency of photovoltaic cells,as the operating temperature rises.As such,the redundant heat generated by the photovoltaic cells was reused as the heat source for the temperature difference of the power generation system to realize secondary power generation.Moreover,the Maximum Power Point Tracking(MPPT)control is also required to achieve the optimal potential of the co-generation system.In this study,a new MPPT control of photovoltaic/temperature difference was proposed further to combine the constant voltage and hyperbolic tangent type adaptive variable step size,in response to the oscillation and misjudgment caused by the fixed step size of traditional conductance increment.Two advantages were included here:First,the control was the fast tracking to the area near the nonlinear region of the maximum power point using 0.78 times of the system open-circuit voltage,suitable for the great changing environmental conditions.Second,the step size was adjusted adaptively and quickly,according to the change of external environmental conditions,when the MPPT was tracking to the nonlinear region near the maximum power points.For instance,the light intensity was used to reduce the system oscillation,indicating the monotonic increase and fast variation in the hyperbolic tangent function.Furthermore,a simulation model was established to evaluate the performance of adaptive variable step conductance increment in the MPPT control of a combined photovoltaic/thermal power generation system using the Matlab/Simulink software.Specifically,Jinao JAMG-6-60-250/SI photovoltaic module was set as the photovoltaic cell model,and Xinghe F40550 was the thermoelectric chip model.Simulation results show that the step changes were consistent under the drastic variation in the light intensity,while the respons

关 键 词：光伏 温差 自适应 双曲正切函数 MPPT 

分 类 号：TK514[动力工程及工程热物理—热能工程] TM615[电气工程—电力系统及自动化]