检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘勇兵 李小瑞[1,2] 沈一丁 党园园[1,2] 李林涛 陈绪永 LIU Yongbing;LI Xiaorui;SHEN Yiding;DANG Yuanyuan;LI Lintao;CHEN Xuyong(College of Chemistry and Chimical Engineering,Shaanxi University of Science and Technology,Xi’an,Shaanxi Province,710021;Shaanxi Key Lab of Chemical Additives for Industry,Xi’an,Shaanxi Province,710021)
机构地区:[1]陕西科技大学化学与化工学院,陕西西安710021 [2]陕西省轻化工助剂重点实验室,陕西西安710021
出 处:《中国造纸》2021年第9期29-35,共7页China Pulp & Paper
基 金:陕西省科技统筹创新工程重点实验室项目(2013SZS10-Z01)。
摘 要:本研究选用丙烯酰氧乙基三甲基氯化铵(DAC)、丙烯酰胺(AM)和甲基丙烯酸缩水甘油酯(GMA)为原料,水和丙二醇甲醚为溶剂,过硫酸铵为引发剂,合成了一种具有强阳离子性的自交联聚合物(MCPAM),并将其应用于浆内施胶。讨论了DAC含量和GMA含量对MCPAM物理化学性质及其对纸张的增强作用,并分析了MCPAM在造纸湿部化学中的作用机理。结果表明,当DAC含量14%,GMA含量2.6%(相对于单体总质量)时,制得MCPAM平均粒径141.6 nm,黏度426.75 mPa·s,阳离子度15.7%,且其浆内施胶效果最佳;当MCPAM添加量为1.6%时,纸张的干抗张指数达98.8 N·m/g,湿抗张指数达19.2 N·m/g,耐折度达134次,撕裂指数达12.1 N·m^(2)/g,与未施胶纸张相比分别提高了68%、300%、346%、35%。Acryloyloxyethyl trimethyl ammonium chloride(DAC),acrylamide(AM)and glycidyl methacrylate(GMA)were used as raw materials,water and propylene glycol methyl ether were used as solvents,ammonium persulfate was used as initiator to synthesize a kind of self-crosslinking polymer MCPAM with strong cationicity,and its application in the sizing was studied.The effect of DAC and GMA contents on physicochemical properties of MCPAM and its enhancement to paper was discussed,and the mechanism of MCPAM in the wet end chemistry of papermaking was analyzed.The results showed that when the content of DAC in MCPAM was 14%and the content of GMA in MCPAM was 2.6%,the average particle size of MCPAM was 141.6 nm,the viscosity was 426.75 mPa·s,and the cationicity was 15.7%.In addition,its papermaking enhancement effect was the best.When the adding amount of MCPAM was 1.6%,the dry tensile index of the paper could reach 98.8 N·m/g,the wet tensile index could reach 19.2 N·m/g,the folding endurance could reach 134 times,and the tearing index could reach 12.1 N·m^(2)/g,compared with original paper,it was increased by 68%,300%,346%,35%,respectively.
分 类 号:TS727.2[轻工技术与工程—制浆造纸工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:52.14.115.102