EFPI-FBG复合光纤传感器高温大应变试验研究  

Experimental Study on EFPI-FBG Composite Optic Fiber Sensor under High Temperature and Large Strain

作　　者：陈珊 李政颖[1] 孙景国 温志勋[3] CHEN Shan;LI Zheng-ying;SUN Jing-guo;WEN Zhi-xun(School of Information Engineering,Wuhan University of Technology,Wuhan,Chima,Post Coxle:430072;No.703 Research Institute of CSSC,Harbin,China,Post Corle:150078;Sschool of Mechanics,.Civil Engineering and Architecture,Northwestern Polytechnical University,Xi'an,China,Post Code:710072)

机构地区：[1]武汉理工大学信息工程学院,湖北武汉430072 [2]中国船舶集团有限公司第七O三研究所,黑龙江哈尔滨150078 [3]西北工业大学力学与土木建筑学院,陕西西安710072

出　　处：《热能动力工程》2021年第10期179-186,共8页Journal of Engineering for Thermal Energy and Power

基　　金：国家科技重大专项(2017-Ⅴ-0003)。

摘　　要：由于缺乏航空发动机/燃气轮机服役环境下叶片温度、应变有效性检测的技术与装置,所以工作叶片的温度环境、载荷环境和应变分布等关键数据的缺失是故障检修工作中的最大困难之一。采用非本征型法布里-珀罗(Extrinsic Farby-Perot Interferometric, EFPI)与光纤光栅(Fiber Bragg Grating, FBG)传感技术,研制了一种基于单模光纤的EFPI-FBG复合光纤传感器及其解调设备。通过搭建高温拉伸试验平台,开展了基于DZ125材料试件的复合光纤传感器高温、大应变测量的性能测试。试验结果表明:复合光纤传感器的工作温度范围为26℃~1 100℃,温度测量精度不超过全量程的5%,分辨率为0.066℃;F-P传感器的应变测量范围为0~19 468με,在1 100℃下的相对误差为1.96%,分辨率为0.053με。Due to the lack of effective detection technology and devices for blade temperature and strain in the aero-engine or gas turbine service environment, the shortage of key data such as the temperature environment, load environment and strain distribution of the working blade was one of the biggest difficulties in troubleshooting.Using extrinsic Fabry-Perot interferometric and fiber bragg grating sensing technologies, a single-mode fiber-based EFPI-FBG composite optic fiber sensor and its demodulation equipment were developed.By building a high temperature tensile test platform, the performance tests of composite fiber sensor based on a specimen with DZ125 material were carried out under high temperature and large strain.The test results show that the working temperature range of the composite optic fiber sensor is 26 ℃ to 1 100 ℃,the accuracy of temperature measurement shall not exceed 5% of full scale and the resolution is 0.066 ℃;the strain measurement range of F-P sensor is 0 to 19 468 με,the relative error is 1.96% and the resolution is 0.053 με at 1 100 ℃.

关 键 词：非本征型法布里-珀罗 光纤光栅 复合光纤传感器 温度-应变测量 

分 类 号：TK231.1[动力工程及工程热物理—动力机械及工程]