检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘浩[1] 马在勇 姜张锐 唐瑜[2] 张卢腾 徐建军[2] 孙皖 袁德文[2] 潘良明[1] 周文雄[1] Liu Hao;Ma Zaiyong;Jiang Zhangrui;Tang Yu;Zhang Luteng;Xu Jianjun;Sun Wan;Yuan Dewen;Pan Liangming;Zhou Wenxiong(Key Laboratory of Low-grade Energy Utilization Technologies and Systems,Ministry of Education,Chongqing University,Chongqing,400044,China;CNNC Key Laboratory on Nuclear Reactor Thermal Hydraulics Technology,Nuclear Power Institute of China,Chengdu,610213,China)
机构地区:[1]重庆大学低品位能源利用技术及系统教育部重点实验室,重庆400044 [2]中国核动力研究设计院中核核反应堆热工水力技术重点实验室,成都610213
出 处:《核动力工程》2021年第6期77-81,共5页Nuclear Power Engineering
基 金:国家自然科学基金(11905021,11805026)。
摘 要:在U型管倒流问题中,倒流临界点的准确判断较为重要。本文建立了U型管倒流特性的理论分析模型,并基于理论分析模型对倒流临界判定准则进行了简化,将倒流理论分析模型和倒流临界简化判定准则的计算结果与实验结果进行对比。结果表明,倒流理论分析模型和倒流临界简化判定准则的计算结果与实验结果符合较好,平均相对误差的绝对值分别为3.4%和3.7%,说明倒流理论分析模型和倒流临界简化判定准则对倒流点预测结果较为准确。In the problem of U-tube reverse flow,accurate determination of the critical point of reverse flow is quite important.In this paper,a theoretical analysis model of U-tube reverse flow characteristics was established,and the criticality criterion of reverse flow based on the theoretical analysis model was simplified.The calculation results of the theoretical analysis model and the simplified reverse flow critical criterion were compared with the experimental results.The results showed that the calculation results of the reverse flow theoretical analysis model and the simplified reverse flow critical criterion were in good agreement with the experimental results,and the absolute values of the average relative errors were 3.4%and 3.7%,respectively.It showed that the theoretical analysis model of reverse flow and the simplified reverse flow critical criterion were more accurate for the prediction results of reverse flow point.
分 类 号:TL334[核科学技术—核技术及应用]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.12.163.164