车载移动泵站液压驱动系统设计方法研究  

Research on the Design Method of Hydraulic Drive System of Vehicle Pump Station

作　　者：臧克江 黄建祥 谢煌生[1] 金璐 陈木凤 杨炫松 叶婷 ZANG Kejiang;HUANG Jianxiang;XIE Huangsheng;JIN Lu;CHEN Mufeng;YANG Xuansong;YE Ting(School of Physics and Electromechanical Engineering, Longyan University, Longyan Fujian 364012, China;Longyan Haidexin Automobile Co., Ltd., Longyan Fujian 364000, China)

机构地区：[1]龙岩学院物理与机电工程学院,福建龙岩364012 [2]龙岩市海德馨汽车有限公司,福建龙岩364000

出　　处：《佳木斯大学学报（自然科学版）》2021年第6期84-87,共4页Journal of Jiamusi University：Natural Science Edition

基　　金：福建省龙岩市新罗区奇迈科技创新基金项目(XLQM002);龙岩学院教育教学改革研究项目(2019JZ03)。

摘　　要：液压传动控制系统是车载移动泵站重要组成部分,由于水泵的工况与设计工作点的偏移对水的输送系统效率有很大的影响,保证水泵在其设计工作点附近工作对水输送系统意义重大。液压驱动系统直接关系到水泵的工况,同时也影响到整个系统的动力匹配。本文对水泵动力驱动系统的能量传输与转换过程进行了分析,确定了各个环节的动力参数关系,并进行了实例计算,对实例系统进行了仿真与试验,验证了计算与仿真的正确性,为车载移动泵站液压驱动系统设计提供了理论参考。The hydraulic transmission control system is an important part of the vehicle pump station,because the working condition of the pump and the deviation of the design work point have a great impact on the efficiency of the water transport system,to ensure that the pump works near by its design work point is of great significance to the water transport system.Hydraulic drive system is directly related to the working condition of the pump,but also affects the power matching of the whole system.In this paper,the water pump power drive system of hydraulic pressure drive control system of energy transfer and conversion process are analyzed,and determine the dynamic parameters of each part,and a calculation example is given,for instance system simulation,verify the validity of the calculation and simulation,for vehicle-mounted mobile pumping station hydraulic drive system design provides a theoretical reference.

关 键 词：移动泵站 液压系统 设计 

分 类 号：TU992.25[建筑科学—市政工程]